Emuca - System for 2 supported wooden sliding doors, soft close, panels not included, Steel and aluminum, anodized Flow sliding system in kit format for supported wooden doors. This kit includes all the necessary accessories for installing a two-door unit, except for the panels. The kit includes two soft-close devices for each door, providing cushioned opening and closing. It is designed for doors weighing up to 30 kg. The trolleys are made of steel and plastic with ball-bearing wheels that make the system glide smoothly. The trolleys also have an adjustment lock that is activated by a simple turn of a screw, in addition to having a 6 mm height adjustment. Its assembly is simple since the machining to be performed is the same on both the top and bottom of the furniture, since this system uses the same rail, which is designed in aluminum. System for 2 wooden doors supported by an upper guide designed for installation in furniture. Supplied in kit format, the packaging includes everything necessary for assembly in the furniture except the boards. Both upper and lower carriages include ball bearings and 6mm adjustment as well as a lock. The kit includes 2 soft-closing devices for each door designed for doors up to 30 kg. Includes four 2.35m anodized aluminum profiles; two for each door, as the top one is identical to the bottom one.
€79,84 €76,75
Placard wardrobe kit with two sliding doors that includes all the necessary hardware and profiles for assembly and installation , except for the panels. This system of hardware and profiles allows you to create your own wardrobe or dressing room with two bottom-mounted sliding doors that glide smoothly and quietly. The Placard sliding system features lower carriages with steel ball bearings, door height adjustment of ± 5 mm, and a spring locking mechanism that facilitates door installation. It includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-jump stop on the upper runner. It also includes a braking device for smooth opening and closing of the doors, with a maximum weight of 30 kg per door. This system offers greater holding power thanks to its hydraulic piston, achieving a progressive and precise closing. The doors are made of a U-shaped crossbar and Wave handle profiles made of aluminum with a white finish , designed for doors with a thickness of 16 mm. Sliding system for creating a wardrobe with two bottom-running sliding doors. Boards are not included. Composed of carriages with steel ball bearings. The lower carriage has height adjustment ± 5 mm from the door. The top and bottom rails are supplied in 2,350 mm measurements so they can be cut to the required length. The handle profiles are supplied in a measurement of 2,350 mm to be cut to the desired size. It includes an anti-derailment system using a spring on the lower carriage and an adjustable anti-jump stop on the upper skate. It has lower carriage spring locking mechanisms that facilitate door installation. It includes a brake device for smooth opening and closing of the doors. The device has greater holding power thanks to its hydraulic piston, which achieves a progressive and precise closure. The system supports a maximum weight of 30 kg per door. Frequently Asked Questions Is a recess in the boards necessary for the installation of the system? No, the included hardware and components are designed for direct installation without the need for recesses in the panels, making assembly easier and reducing installation time. What features does the soft-close system have? The soft-close system includes hydraulic piston devices that allow for a cushioned and silent closing, preventing sudden slams at the end of the door's travel. This improves security and prolongs the life of the mechanism. How do I adjust the leveling and locking mechanism? The kit includes an adjustment system on the bottom track that allows the doors to be precisely leveled and secure in place once installed. This makes it easier to correct unevenness on the mounting surface. What materials are used in hardware and how do they affect its durability? The hardware is made of steel and aluminum with anodized or white-painted finishes, ensuring high corrosion resistance and a long-lasting appearance even in humid environments. What is the RAL code for the Placard sliding door system's rails and handles? The RAL of the gloss white finish on the tracks and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
€152,86 €146,44
Flow 2 surface-mounted sliding system in kit format for supported wooden doors. This kit includes all the accessories necessary to install a 2-door unit, except for the panels. The kit includes 2 inverted soft-closing devices, which allow the upper and lower carriages to be mounted symmetrically and achieve a cushioned opening and closing. Designed for doors weighing up to 30 kg. The trolleys are made of steel and plastic with ball bearing wheels which make the system slide smoothly. Likewise, these trolleys have an adjustment lock which is activated by a simple turn of a screw, as well as having a height adjustment of 9 mm. The assembly of the rails is very simple and fast since no prior machining is required to install them. All you need to do is screw in some clips to secure them at the top and bottom and then clip the surface rails. The length of the rails is 2.35m and is available in black painted and matte anodized finish. System for 2 wooden doors supported by an upper guide designed for installation in furniture. The installation of the surface rails in black painted finish is done using clips included in the kit. Supplied in kit format, the packaging includes everything needed to assemble the unit except the boards. Both the upper and lower carriages include ball bearings and 9mm adjustment as well as a lock. The kit includes 2 reverse soft closing devices for each door designed for doors up to 30 kg.
€75,74 - €76,75
Placard wardrobe kit with two sliding doors that includes all the necessary hardware and profiles for assembly and installation, except for the panels. This system of hardware and profiles allows you to create your own wardrobe or dressing room with two bottom-mounted sliding doors that glide smoothly and quietly. The Placard sliding system features lower carriages with steel ball bearings, door height adjustment of ± 5 mm, and a spring locking mechanism that facilitates door installation. It includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-jump stop on the upper runner. It also includes a braking device for smooth opening and closing of the doors, with a maximum weight of 30 kg per door. This system offers greater holding power thanks to its hydraulic piston, achieving a progressive and precise closing. The doors are equipped with a U-shaped crossbar and Sharp aluminum handle profiles , designed for doors with thicknesses of 16/18/19 mm. Sliding system for creating a wardrobe with two bottom-hung sliding doors. Suitable for doors with thicknesses of 16/18/19 mm and a Sharp square handle profile. Panels not included . It incorporates a brake device for smooth opening and closing for a load capacity of up to 30 kg per door. Consisting of carriages with ball bearings, height adjustment of ± 5 mm, and a spring locking system that facilitates door installation. It also includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-jump stop on the upper runner. The handle profiles and the top and bottom rails are supplied in a measurement of 2,350 mm to be cut to the desired size. Includes a hardware set for two doors, top and bottom rails, handle profiles and a U-shaped crossbar. Profiles made of aluminum and finished in black/white/matte anodized paint. 16mm black EAN 8432393300498 16mm matt anodized EAN 8432393330976 18 mm matte anodized EAN 8432393330983 19mm white EAN 8432393330990 19mm black EAN 8432393331010 19mm matt anodized EAN 8432393331003
€152,50 €146,44
Neco wardrobe kit with two sliding doors that includes all the hardware and profiles necessary for its assembly and installation except the panels . The Neco sliding system has the best quality in sliding door systems at the best price. With a load capacity of 50 kg of weight per door. Its carriages have steel ball bearings and are valid for the right or left door. It also includes euro thread screws for the assembly of the carriages and skates. This system includes anti-derailment on both the interior and exterior door and adjustable brakes to adjust the closing of the door that do not require machining on the upper rail. The assembly is easy to install since it includes clips for the lower skates which offer a simpler placement of the doors. First the doors are hung on the upper rail and finally the lower skates are placed. The system has a reduced opening loss of 21 mm which can be reduced to 0 by removing a piece of the interior carriage, in this way the doors could be crossed in their entirety. This makes it easier to install internal drawers or removable elements. The door composition includes a straightening profile and Styl handle profiles made of aluminium painted steel with protective film, designed for doors with a thickness of 16 mm. Sliding system for creating a wardrobe with two hanging sliding doors. Boards are not included. The system supports a maximum weight of 50 kg per door. Composed of carriages with steel ball bearings. The top and bottom rails are supplied at a length of 2300mm to be cut to the desired length. The styl handle and straightener profiles are supplied in a measurement of 2300mm to be cut to the desired size. Includes euro thread screws for mounting the carts and skates. Valid for right or left door. The upper carriages and lower skates are made of sheet steel. Includes anti-derailment on both the interior and exterior doors. It has adjustable brakes to adjust the closing of the door. The positioning of the upper brake does not require pre-drilling.
€111,98 €107,05
Flow surface sliding system in kit format for supported wooden doors. This kit includes all the accessories necessary to install a 2-door unit, except for the panels. The kit includes 2 soft-closing devices for each door, which provides a cushioned opening and closing, and is designed for doors weighing up to 30 kg. The trolleys are made of steel and plastic with ball bearing wheels which make the system slide smoothly. Likewise, these trolleys have an adjustment lock which is activated by a simple turn of a screw and also have a height adjustment of 6 mm. The assembly of the rails is very simple and fast since no prior machining is required to install them. All you need to do is screw in some clips to secure them at the top and bottom and then clip the surface rails. System for 2 wooden doors supported by an upper guide designed for installation in furniture. The surface rails are installed using clips included in the kit. Supplied in kit format, the packaging includes everything needed to assemble the unit except the boards. Both the upper and lower carriages include ball bearings and 6mm adjustment as well as a lock. The kit includes 2 soft closing devices for each door designed for doors up to 30 kg
€83,82 €80,79
Safety guard - Blister 4 pieces. - Avoid unwanted closing of doors and windows with sliding systems. - Made of metal. - Article also known as: child protection, baby protection, child protection.
€8,75 €7,83
Push button door lock 347/27 mm. - Sliding door lock. - With push button. - Measurement: 347/27 mm. - Chrome color.
€15,27 €13,03
Kit for Placard wardrobe with two sliding doors that includes all the necessary hardware and profiles for its assembly and installation except the panels. This system of hardware and profiles allows you to create your own wardrobe or dressing room with two sliding doors with lower support and smooth and silent sliding. The Placard sliding system has lower carriages with steel ball bearings, a door height adjustment of ± 5 mm and a spring locking mechanism that facilitates the installation of the doors. It includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-jump stop on the upper slide. It also includes a brake device for the smooth opening and closing of the doors, with a maximum weight of 30 kg per door. This system has greater retention power thanks to its hydraulic piston, thus achieving a progressive and precise closing. For the composition of the doors, a U-shaped crossbar profile and Wave handle profiles made of matte anodized aluminum are included, designed for doors with thicknesses of 16 and 18 mm. Sliding system for creating a wardrobe with two bottom-running sliding doors. Boards are not included. Composed of carriages with steel ball bearings. The top and bottom rails are supplied at a length of 2350mm for cutting to the desired length. The handle profiles are supplied in a measurement of 2350mm to be cut to the desired size. The lower carriage has height adjustment of ± 5 mm from the door. Includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-jump stop on the upper skate. It has lower carriage spring locking mechanisms that facilitate the installation of the doors. It includes a braking device for smooth opening and closing of the doors. The device has greater holding power thanks to its hydraulic piston, which thus achieves a progressive and precise closure. The system supports a maximum weight of 30 kg per door.
€158,56 - €167,65
Push button door lock 147/27 mm. - Sliding door lock. - With push button. - Measurement: 147/27 mm. - Chrome color.
€19,07 €17,07
Space+ wardrobe kit with two sliding doors , including all the hardware and profiles needed for assembly and installation, except for the panels. The Space+ sliding system offers maximum smoothness in sliding wardrobe doors , thanks to its high-quality steel ball bearings . It has 4 mm door height adjustment and includes an anti-crossing system for the doors. It also includes a brake device for smooth opening and closing of the doors, with a maximum weight of 50 kg per door. Assembly and installation are really simple, the automatic insertion of the runners into the lower rail and the fixing of the upper rail elements allows them to be disassembled without having to remove the rail from the wardrobe. For the composition of the doors, a vertical profile and Free rapid handle profiles made of matte anodized aluminum are included, designed for doors with thicknesses of 19 to 20 mm. Sliding system for creating a wardrobe with two hanging sliding doors. Boards are not included. Composed of carriages with high quality steel ball bearings. The top and bottom rails are supplied at a length of 2300mm to be cut to the desired length. The handle and vertical profiles are supplied at a measurement of 2300mm to be cut to the desired size. It includes a braking device for smooth opening and closing of the doors. The system supports a maximum weight of 50 kg per door. The upper carriages and lower skates are made of painted aluminum. They have 4 mm door height adjustment. They include an anti-crossing door system. Adhesive spacers made of felt are supplied. The upper and lower rails are made of natural aluminium.
€224,77
The handle for sliding wooden doors Pasadena It is ideal for both decoration and continuous use thanks to its robust design. It is made of steel , with a textured black finish. It is composed of two pieces : an exterior handle of easy grip and an interior plate with a fingernail to open the door without damaging the walls . It is suitable for doors 35 to 45 mm thick and has a length of 240 mm. It is recommended to install the handle vertically . To do this, only two 10mm diameter drill holes will be required. screws M8 for mounting come included . In addition, each handle is individually wrapped to prevent bumps or scratches. Handle for hanging wooden sliding doors, consisting of two parts: an easy-to-grip exterior handle and an interior finger-grip that won't damage walls. You can open the door from both sides comfortably and easily. Length 240 mm. Suitable for center distances (distance between mounting holes) of 180 mm. Suitable for doors 35 to 45 mm thick. Easy installation, as the necessary screws are included. Only two 10 mm diameter holes are required. No door carving or installation experience is required. Its rounded design provides a comfortable feel and protects your hands from damage. Pieces are also shipped individually to prevent scratches. It is made of steel with a textured black finish.
€16,31 €16,15
Lock kit with lock for sliding passage doors , with a modern and elegant design, they are ideal for any type of environment. The kit has a rosette crutch with a 50 mm circular (D.57 mm) or square (57 x 57 mm) entry. With manual locking and emergency release for installation on sliding doors with thicknesses between 35 and 40 mm . Made of steel and with zamak nail. The supply includes: parrot beak lock, locking device, release, nail, strike plate and screws. Mute lock kit with 57 mm diameter round rosette for sliding doors. With manual locking and emergency unlocking. With 50 mm inset, it adapts to door thicknesses between 35 and 40 mm. Includes a parrot beak lock, a locking device, a release, a nail puller, a strike plate and screws. The nail puller is placed on the edge of the door and acts as a handle. It is very useful for sliding doors between partitions, where the door is hidden so that you do not have access to the handles on the main sides of the door and you can use the nail puller as a handle to pull the door out. Made of steel and zamak nail with black finish.
€23,22 - €24,73
Flow 2 surface-mounted sliding system in kit format for supported wooden doors. This kit includes all the accessories necessary to install a 2-door unit, except for the panels. The kit includes 2 inverted soft-closing devices, which allow the upper and lower carriages to be mounted symmetrically and achieve a cushioned opening and closing. Designed for doors weighing up to 30 kg. The trolleys are made of steel and plastic with ball bearing wheels which make the system slide smoothly. Likewise, these trolleys have an adjustment lock which is activated by a simple turn of a screw and also have a height adjustment of 9 mm. The assembly of the rails is very simple and fast since no prior machining is required to install them. All you need to do is screw in some clips to secure them at the top and bottom and then clip the surface rails. The length of the rails is 2.35m and is available in black painted and matte anodized finish.
€76,75 - €87,86
System for hanging wooden sliding doors, ideal for separating the environments of your rooms. It allows you to create both a rustic and modern atmosphere with an elegant style. The system consists of a 2-metre top rail, two carriages for one door, anti-derailment accessories and the installation and fixing screws. The boards are not included. This is a system for wooden doors with door thicknesses of 35 to 45 mm. The maximum load allowed is 80 kg for the system without soft closing and 60 kg with soft closing, although the maximum weight of the door will depend on the wall where it is installed (plasterboard, brick, concrete). This system stands out for its smooth sliding and is made of steel with a black painted finish . Normal closing: Sliding system for hanging wooden doors, ideal for achieving both a rustic and modern atmosphere. With a load capacity of up to 80 kg and wooden door thicknesses of 40 to 45 mm. The kit includes a 2-metre profile with its stops, two carriages for one door, accessories and installation and fixing screws. The boards are not included. Easy installation process and smooth rolling. Made of steel with black painted finish. Soft closing: With a load capacity of up to 60 kg and wooden door thicknesses of 40 to 45 mm. The kit includes a 2-metre profile with its stops, two carriages for one door, soft closing, accessories and installation and fixing screws. The boards are not included. With soft closing. Easy installation process and smooth rolling. Made of steel with black painted finish. FAQs - Frequently Asked Questions How to mount wooden hanging sliding doors to the wall with the Barn system? The following video shows how to assemble the sliding wardrobe door system. How much space is left between the door and the wall when installing the Barn system? For the commonly used door thicknesses of 40 and 45 mm, the clearance between the door and the wall is 14.8 mm and 12.3 mm respectively.
€76,75 - €102,00
【 PREMIUM QUALITY 】- Constructed with a pure copper motor and a stable base, it is corrosion and rust resistant. Plus, it's equipped with a waterproof and dustproof housing, giving it a sleek look and is durable enough to last a long time. 【 VERSATILE OPERATION 】- Our automatic sliding gate opener features 2 wireless remote controls, including 4-button remotes to open, close, stop, or use pedestrian mode on your gate. The remote controls can work up to 99 feet (30 m) away. The emergency release key can also help you get in or out when the power is off. 【 SAFETY PROTECTION 】- The motor has a temperature protector, and the motor thrust can be adjusted during operation to prevent overload. Featuring an anti-shock design, this model will stop and reverse if it encounters an obstruction while closing or opening. 【 INSTANT SETUP 】- All necessary hardware and accessories for installation are provided in the box. 【 WIDELY USE 】- It is suitable for hotels, factories, schools, private homes, farms and ranches, etc. And it is commonly used in our life. 800kg Automatic Sliding Gate Opener Our automatic sliding gate opener is designed to be easy to install without the need for an electrician or welding. It's commonly used on heavy-duty sliding gates with a maximum weight of 800 kg per gate leaf. This gate opener can be used for many applications, including hotels, factories, schools, private homes, farms and ranches, and more. The kit includes everything you need for installation, so don't hesitate to buy one for your convenience and family safety. Premium Quality Convenient Operation Safety measure Set Up Instantly VEVOR is a professional brand specializing in equipment and tools. With thousands of motivated employees, VEVOR is committed to providing our customers with sturdy equipment and tools at incredibly low prices. VEVOR products are currently sold in over 200 countries and regions, with over 10 million members worldwide. Why Choose VEVOR? High Quality Lowest Payment Fast & Secure Service 30 Days Money-Free Return 24/7 Attentive Services High speed of movement Our powerful sliding gate opener can operate gates weighing up to 600 kg (1,400 lbs). Designed with a pure copper motor and a stable base, the gate opener can be guaranteed to open the gate smoothly at a speed of 13 m/min (43 ft/min). 100 ft (30.4 m) remote control Our automatic sliding gate opener is equipped with two wireless remote controls to open, close, stop, or use pedestrian mode at the gate. The remote controls can operate up to over 100 feet (30.4 m), so you don't have to wait at the gate every time you return home. Durable in poor conditions The machine is equipped with a waterproof and dustproof casing. It is designed to withstand the elements, rugged enough to withstand a variety of weather conditions. Silent in operation It produces less than 56 dB of noise so you won't be bothered by high-decibel pollution, and you can work in a quiet environment. Easy to install This gate opener is designed to be easy to install without the need for an electrician or soldering. Plus, our kit includes everything you need for installation. It's quite easy and convenient for you to assemble. Compatible accessories Compatible with other accessories such as infrared sensors, solar panels, alarms, wireless keypads, and more. Package contents included: 1 x Main Operator of Automatic Door Operator 2 x Remote Controls 2 x Release Keys 8 x 0.5m (1.6') Metal Racks 1 x Photocell Assembly 1 x Set of Installation Accessories Specification Power Supply 220 V AC, 50 Hz, 280 W Maximum Door Weight 800 kg Output Torque 14 Nm Job S2, 15 minutes Door Movement Speed 13 m/min (43 ft/min) Remote Control Range ≥ 30 m (100 ft) Recording Remote Controls 25 (2 included) Metal Zipper 4 m (13 ft) Gross Weight 17.3 kg (38.2 lb) Manual download link Customer Questions & Answers: Ask: The remote control is variable or fixed code. Answer: The remote control of the product is rolling code. Ask: Good afternoon, Is it possible to install a switch to open the gate? The gate is very far from the house, and the remote control doesn't reach it. Thanks, Juanjo. Answer: The product can be controlled by adding a wired switch, but it cannot be controlled by the remote control. The cable used to add a switch must be very long. Ask: Hello. Can you tell me what the four buttons on the remote control do? Thank you. Answer: Please see the images at the following link: https://we.tl/t-x1c3SWaTK2 Ask: Can the remote be programmed? Answer: All remote controls that come with the product are programmed. Ask: Hello, how do you program it to close the door automatically and how long does it take? Answer: Hello, you can choose between 5 seconds, 10 seconds and 20 seconds. Hello. I'd like to know if it's possible to connect a WiFi relay switch (Son-Off type) and a push-button release button in parallel to pins 2 and 5 of the Vevor motor's electronic board, so they can operate interchangeably as needed. Thank you. Answer: It is recommended to connect WIFI relay switch and you need to purchase the module yourself. Ask: I'm thinking of buying this kit and I want to know if it's possible to add 2 more meters of zipper. Answer: This product is a 4 meters zipper, if it is not long enough, you can buy it on the platform if it is not long enough, it is universal. Ask: Hello, I need the MD370 programming manual. I've lost the electrical diagram. Thanks. Answer: More information can be found in the files at the link: https://d2v0huudrf11kh.cloudfront.net/vevor-center-goods/12_1667989249034.pdf<br/>https://d2v0huudrf11kh.cloudfront.net/vevor-center-goods/10_1659006006195.mp4 Ask: Hello. Can I connect a Wi-Fi module? Thanks. Answer: Yes, but this product is not equipped with WIFI, you need to purchase the WIFI module yourself. Ask: Can I install a light when the door opens? Can you tell me how? Thanks. Answer: A 220 volt light plugs into this port as shown in the image at the link: https://d2v0huudrf11kh.cloudfront.net/vevor-center-goods/12_1680163031229.jpg
€171,18
Placard 90 wardrobe kit with two sliding doors includes all the hardware and profiles necessary for assembly and installation , except for the panels. This system of hardware and profiles allows you to create your own wardrobe or dressing room with two bottom-mounted sliding doors that glide smoothly and quietly. The Placard sliding system features lower carriages with steel ball bearings, door height adjustment of ± 5 mm, and a spring locking mechanism that facilitates door installation. It includes an anti-derailment system using a spring in the lower carriage and an adjustable anti-spring stop on the upper runner. It also incorporates a braking device for smooth opening and closing of the doors, with a maximum weight of 30 kg per door. This system has greater retention power thanks to its hydraulic piston, achieving a progressive and precise closing. The doors are composed of a U-shaped crossbar profile and Vall handle profiles made of matte anodized aluminum , designed for doors with a thickness of 19 mm. Sliding system for creating a wardrobe with two bottom-running sliding doors. Boards are not included. Composed of carriages with steel ball bearings. The lower carriage has height adjustment ± 5 mm from the door. The top and bottom rails are supplied in 2350mm lengths so they can be cut to the required size. The handle profiles are supplied in a measurement of 2350mm so they can be cut to the desired size. It includes an anti-derailment system using a spring on the lower carriage and an adjustable anti-jump stop on the upper skate. It has lower carriage spring locking mechanisms that facilitate door installation. It includes a brake device for smooth opening and closing of the doors. The device has greater holding power thanks to its hydraulic piston, which achieves a progressive and precise closure. The system supports a maximum weight of 30 kg per door.
€178,32 €170,68
Hanging wooden sliding door system ideal for dividing the spaces in your rooms. The system consists of a top track, a set of soft-close carriages, a front cover profile, plastic side covers, and five wall anchors. Panels not included. The top rail on which the door carriages slide and the front trim cover to conceal the system are made of anodized aluminum and are supplied in 2-meter lengths. The carriage sets are composed of ball-bearing wheels with 10 mm height adjustment and a locking system to prevent the door from sagging. They also have a lower guide using a swivel wheel and are easy to install, as they do not require any prior machining for installation on the track. They incorporate a two-way soft-closing device that operates both during opening and closing, with a load capacity of up to 80 kg. The kit includes 5 wall anchors for when ceiling anchoring is not possible, with a maximum separation between them of no more than 500 mm , and a set of grey plastic side covers to conceal the fittings. Sliding system of wooden hanging doors (except panels) for ceiling or wall installation with thicknesses of 18 to 40 mm. With bi-directional soft and load capacity of up to 80 kg. 4-wheel trolleys with ball bearings, 10 mm height adjustment, and anti-fall locking system. Anodized aluminum clipped front cover and rail at 2 meters and gray plastic side covers. With 5 wall anchors for when ceiling anchoring is not possible.
€97,32 €93,92
Wall system kit for mounting one complete wooden door to a wall. This system is widely used to separate areas in your rooms where space is limited for a conventional door. The kit includes everything needed for assembly, including lower runners, a guide, and an upper carriage for smooth sliding. The door panel is not included. It has a large load capacity of up to 80 kg and a two-way soft-close system, which works in both directions when opening and closing . It also has a small lever that acts as an anti-derailment system to prevent the door from accidentally falling off. The system can be mounted in two different ways: surface-mounted or flush-mounted to the door if you want to get as close to the wall as possible. The minimum door thickness required for installation is 35 or 40 mm, depending on the mounting option chosen. The door requires lower machining to accommodate the runners and the rail for the guide. It has height adjustment up to 10 mm and door tilt adjustment. Sliding system for a wooden hanging door for wall installation. With a load capacity of up to 80 kg. The minimum door thickness required for installation is 35 or 40 mm, depending on the installation option chosen. It features soft-closing in both directions and an anti-derailment system to prevent the door from accidentally coming off. The system features height adjustment of up to 10 mm and door tilt adjustment. The top rail is 1.13 m long. The kit includes everything needed to assemble a door (except the board). FAQs - Frequently Asked Questions: What minimum door thickness should I use to install the Wall system? For surface mounting, the door must be at least 35mm thick, while for flush mounting it must be at least 40mm thick. How far from the wall is the door in the Wall system? If mounted on the option with a machined door, the distance is 10mm.
€235,49 €225,22
Product Features System for hanging and folding wooden doors for installation in large wardrobes with soft closing. The kit includes a bottom guide profile and all necessary hardware except the panels for mounting two folding doors (for 4 wooden panels/leaf, not included). Also available without a bottom guide. Load capacity of 50 kg per system (25 kg per leaf) 6-wheel upper carriages with easy-to-adjust ball bearings. Anodized aluminum upper rails with a length of 2.35 m The Twofold sliding folding door system in kit format includes all the necessary hardware to install a wardrobe with 2 folding doors. Except for the panels . This system is widely used in small spaces where hinged-door cabinets cannot be installed. The hinges included in the kit feature soft closing and clip attachment to the accessories also included in the packaging. It stands out for its very smooth sliding, load capacity of 50 kg per system (25 kg per leaf), and versatile installation, as it can be installed in different ways depending on the area of use and type of cabinet to be installed. The kit is available in two versions: the Twofold Kit with soft closing and a lower guide profile for large cabinets. Twofold kit with soft close, this one without profile for smaller cabinets. FAQs - Frequently Asked Questions What are the maximum recommended door sizes for the Twofold system? The maximum dimensions per door are 2,400 high by 500 wide (per leaf). Can the Twofold system be used without the lower guide and carriage? The Twofold system offers the versatility of installation, offering smooth sliding with or without a bottom guide. The use of this will depend on the type of cabinet in which the system is installed. How to install folding doors on a wardrobe using the Twofold system? The following video shows how to assemble the sliding wardrobe door system. What should be the arrangement of the Ø35 cup hinges that secure the door to the Twofold wardrobe? The most common approach is to place the side hinges in line with the center hinges. However, for cabinets with very heavy doors, two of the cup hinges can be placed at the top of the cabinet to increase strength and stability.
€63,62 - €82,81
Find the perfect sliding door guides, designed for secure installation and smooth sliding on all types of doors. From floor guides to hanging or ceiling systems, rails, door kits, and more, we offer a wide range to suit different materials, styles, and needs, whether in the home, closet, garage, or industrial applications.
