De la marca WOLFPACK LINEA PROFESIONAL.
Conjunto de soldadura que contiene estaño y pasta decapante
Este juego cuenta con una barra de estaño con una composición de 33%
Ideal para su aplicación en trabajos de soldadura en el ámbito de la electricidad y la electrónica, como en placas de circuitos, componentes electrónicos y otros dispositivos
Una combinación perfecta para garantizar un trabajo de calidad y precisión
Artículo también conocido como estaño, pasta decapante, set soldadura, set soldar, estaño soldadura, pasta soldar, pasta soldadura, etc
Dough Tongs - Supported amperage: 300/400 Amps - Made of high-quality metal. It offers excellent electrical conductivity and high resistance to oxidation. Its service life is long, and the ground clamp is galvanized, ensuring superior wear resistance and withstanding intense, prolonged use. - The 300/400 amp ground clamp is easy to install and configure, requiring no additional intervention. It can be operated simply and without complications, allowing users to quickly integrate it into their work without wasting time. - Ideal for welding work. It's ideal for use in a variety of industries, including shipyards, mechanical engineering, oil extraction, and automotive and parts manufacturing, ensuring exceptional versatility. - Item known as: ground clamp, earth clamp, ground connection clamp, welding ground clamp, 500/600A ground clamp, welding clamp, welding ground clamp, welding ground clamp, welding tool, welding equipment, arc welding, hand welding tool, welding accessory, clamp for welding equipment, industrial ground clamp, professional welding, clamps, ground clamps, welding equipment, welding tools, welding accessories.
Wolfpack Inverter Welding TIG 200 A MMA 160 A - Ah: 10-200 A - Nominal current: 21V - No-load voltage 42-55V - Nominal voltage: 18V - Single-phase, portable, ventilated inverter welding for the MMA welding electrode in direct current (DC). - Compact and lightweight. - Type of electrode usable: rutile, basic, stainless, cast iron - No-load loss 35W - Adjustable from 10 to 200 amps. - With fan. - Voltage 200 volt - Power factor 0.93 - With thermal protection - Protection class: IP21S - Insulation class: F - Article known as welder, inverter welder, welding machine, professional welder, electrode welder, etc.
Dough Tongs - Supported amperage: 500/600 Amps. - Made of high-quality metal. It offers excellent electrical conductivity and high resistance to oxidation. Its service life is long, and the ground clamp is galvanized, ensuring superior wear resistance and withstanding intense, prolonged use. - The 500/600 amp ground clamp is easy to install and configure, requiring no additional intervention. It can be operated simply and without complications, allowing users to quickly integrate it into their work without wasting time. - Ideal for welding work. It's ideal for use in a variety of industries, including shipyards, mechanical engineering, oil extraction, and automotive and parts manufacturing, ensuring exceptional versatility. - Item known as: ground clamp, earth clamp, ground connection clamp, welding ground clamp, 500/600A ground clamp, welding clamp, welding ground clamp, welding ground clamp, welding tool, welding equipment, arc welding, hand welding tool, welding accessory, clamp for welding equipment, industrial ground clamp, professional welding, clamps, ground clamps, welding equipment, welding tools, welding accessories.
Welder's Leather Bib - Made of high-strength leather - Protects against incandescent welding projections. - Resistant to high temperatures generated during the welding process. - Fireproof: flame resistant, reducing the risk of burning. - Comfort and flexibility to allow freedom of movement. - It has a nylon strap that ensures a good fit to the body. - Neck and waist support, helping to protect the chest, stomach and legs. - Ideal for use in welding, cutting and grinding, metal fabrication, casting and forging, automotive, mining, etc. - Item also known as leather bib, leather bib, fireproof bib, welding bib, safety clothing, welding apron, leather apron, welder's apron, blacksmith apron, etc.
Suede Leather Glove With Reflective Band - Size 9" - Measurement: 26 cm. - Reflective back of hand to prevent workplace accidents. - Double leather reinforcement in the palm area and the thumb and index fingers, since this area of the glove is the one that suffers the most wear. - Ideal for fruit picking, agricultural and livestock uses, etc. - Highly resistant and comfortable gloves. - Item also known as welder's glove, reinforced glove, reflective glove, welding glove, work glove, etc. (Pair)
Anti-adhesive spray for welding - Capacity: 300 ml. - Anti-adhesive spray for use on welding nozzles or on the parts you are welding. - This spray prevents welding spatter from sticking to nozzles or parts to be joined, helping with easy cleaning. - Spray the spray from a distance of 10 to 15 cm. - Non-flammable. - Article known as non-stick welding, non-adhesive welding,
40 Watt Welder/Engraver. - Power 40 w. - Removable straight tip. - Includes support stand. - Operating instructions: > Check that the voltage indicated on the identification plate is the same as that of the power source. > Before heating make sure the tip is correctly in position. The clamp screw must be tightened. > Connect it to the appropriate electrical outlet. > The tip can only be removed with the soldering iron switched off and without using force. Screw the tip in as far as it will go. > Do not heat the soldering iron without a tip > After use, allow the soldering iron to cool in air (do not cool in water!) > After use, place the soldering iron only on a support > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - Ideal for micro soldering work, laptop repair, electronic component repair, circuit repair, etc. - Article also known as tin welder, soldering iron, straight tip welder, motherboard welder, circuit repairer, fine tip welder, chip reballing, soldering tools, microsoldering,
Soldering iron / Engraver 30 Watt. With 6 tips - Power 30 w. - Dual use: welder and engraver. - Includes support stand. - 6 tips for decorating wood, leather, cork, etc. - Operating instructions: > Check that the voltage indicated on the identification plate is the same as that of the power source. > Before heating make sure the tip is correctly in position. The clamp screw must be tightened. > Connect it to the appropriate electrical outlet. > The tip can only be removed with the soldering iron switched off and without using force. Screw the tip in as far as it will go. > Do not heat the soldering iron without a tip > After use, allow the soldering iron to cool in air (do not cool in water!) > After use, place the soldering iron only on a support > If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - Article also known as tin welder.
Automatic welding screen - The welding screen protects against radiation generated during welding processes. - It has protection levels from 9 to 13, adjustable by means of an external potentiometer. - It also has a sensitivity adjustment. When the electric arc is activated, the protective cassette darkens automatically, thus avoiding glare. - Permanently protects (even with light tones) against UV and IR radiation. - Field of view: 42 x 92 mm. - Dimming: 0.2 ms. - Clarification: 0.1 to 1 sec. - Energy: Solar cells - UV and IR protection: DIN 16 - Light Tone: DIN 4 - Dark tone: DIN 9 to 13 - Variable dimming control. - Weight 480 grams. - Article known as welding screen, welder screen.
Hand welding screen. - Material: black fiberglass with polyester. - Grade 11 rectangular filter eyepiece and filter cover. - Manual fastening on the inside of the screen. - Article known as welding screen, welder screen.
Replacement Screen For Welding Screen Welding 99819 - Measurements: 116X90 mm. - Made of plastic. - Replacement part valid for 15040045 Automatic Welding Screen with Solar Cells and Batteries (CR2032)
Replacement Inner Lens for Electric Welding Screen. - Replacement lens for automatic welding screen. - Only valid for the Maurer automatic welding screen. - Internal lens.
Long Red Denso Welding Glove - Made entirely of thick cowhide split leather. - Uses: Welding and construction. - Great protection and tear resistance. - Seam protection on fingers and sides. - Ideal for welding work. - Heavy duty, ideal for high demand welding work and high levels of protection. - Item known as welding gloves. (Pair)
Yamato 30 w. soldering iron + 6 tips - Dual use: welder and engraver. - Includes support stand. - Power 30 w. - 6 tips for decorating wood, leather, cork, etc. - Article also known as tin welder.
Yamato 100 w soldering iron. Gun + case. - Professional electric welder for precision work. - Immediate heating by trigger. - Direct lighting bulb. - Includes case, soldering paste and 2 replacement tips. - Power 100 w. - Article also known as tin welder.
