Herrajes para mesas

These square legs are made of steel with a square section of 50x50mm , ideal for all types of kitchen, home and office furniture. They include everything you need for assembly, you just have to add the board you like best. They also have plastic end caps that serve as a finishing touch to the legs and prevent damage to the floor.

Read more less

Set of 2 rectangular table legs, ideal for kitchen and dining room tables. The fixed leg has a height of 720 mm and you can choose between two width sizes: 600 mm and 800 mm. Its assembly is very simple, screwing the leg to the table top using screws which are included in the supply. It also includes stops to avoid marks on the floor. The legs are made of steel and painted in black or white .

Read more less

Set of 4 round rod table legs, ideal for side tables. The fixed leg has a height of 400 mm. Its assembly is very simple, screwing the leg to the table top using screws which are included in the supply. It also includes stops to avoid marks on the floor. The legs are made of steel and painted in black or white . Set of fixed rod-shaped legs. You can create multipurpose tables. Leg dimensions: 400 mm high. Includes screws and stoppers to prevent marking on the floor. Made of steel and black painted finish. Load capacity of 40 kg per leg.

Read more less

The extendable Coktail Reverse H35 system is made up of guides for the extraction of a folding table hidden inside a compartment that could house a drawer. This system is often used in small kitchens where a support base is needed for breakfast and meals, although it can be used in other rooms of the home. The system must be installed in modules with a width between 300 and 1,200 mm and a minimum depth of 545 mm. The system's guides allow the extraction of a surface of 750 mm and a load capacity of 60 kg. They also have a safety locking mechanism to prevent the table from being closed accidentally. The table top that forms the support surface is not included. System for obtaining an additional surface or table in kitchen environments, 750 mm long. Valid for modules with a width of 300 to 1,200 mm, minimum depth of 545 mm and load capacity of 60 kg. The guides have a locking system when open to prevent involuntary closure. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

Oplà Top, a concealed side table system that can be quickly removed and lifted. This system is intended for use in the kitchen. With a simple gesture, the table is positioned at the same level as the top of the worktop, thereby increasing the surface area on which we are working. The Oplà Top can be installed in modules with a width of 900 mm and a minimum depth of 540 mm, which can be the space used for a drawer. The front of the unit behind which the system is stored must have hinges for opening and allowing it to be removed. The system's guides allow the removal of a surface area of ​​500 mm and a load capacity of 40 kg . The guides are connected by a profile that gives greater stability to the assembly. If we want to mount the system in a module with a width of less than 900 mm, we will cut this stabilizing profile to adjust it to the required width. In addition, the mechanism has springs that facilitate the lifting movement of the mechanism. The boards that make up the support surface or the front are not included. Removable and liftable system to create a work surface in kitchen environments, 500 mm long. Valid for modules with a width of 900 mm, minimum depth of 540 mm and load capacity of 40 kg. The guides have a locking system when open to prevent involuntary closure. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

The Hexa cable management column is designed to keep cables organized under your office desk and prevent them from getting tangled. In addition, it allows you to hide the cables inside thanks to its 14 circular vertebrae, which can be left free in an articulated manner or in a fixed tubular position . These vertebrae are assembled by pressure and are easily disassembled, and the height can be adjusted up to a maximum of 770 mm. It also has anchors that are screwed to the table, and a zamak base to give the whole unit strength and stability. The cable management column is made of plastic with a black finish that is currently on trend in the market, allowing it to be integrated into the furniture.

Read more less

Pipe 4 square design articulated cable management column . It allows you to hide the cables of electronic devices in desks, office tables and home furniture. In this way, it allows you to organise and tidy the cables under the table to prevent them from getting tangled. This cable management column is made of plastic with an aluminium painted finish that allows it to be integrated into the furniture. It is supplied disassembled in three parts and its assembly is very simple thanks to the fact that all its accessories fit together by snapping. The height can be adjusted with the segments, up to a maximum of 780 mm.

Read more less

The Lunch+39 system consists of guides for the extraction of a folding table hidden inside a compartment that could house a drawer. This system is intended for use in the living room or home office, as the installation depth is 390 mm. The system can be installed in modules with a width of 450 to 1,200 mm and a minimum depth of 390 mm. The system's guides allow the extraction of a surface of 705 mm and a load capacity of 60 kg. The extendable table is obtained by means of 2 boards that are unfolded with the help of hinges, remaining housed in the same compartment of the system once they have finished being used. In addition, they have a safety locking mechanism to prevent the table from being closed inadvertently. The boards that make up the support surface are not included. Concealed pull-out table system for work environments, 705 mm long. Valid for modules with a width of 450 and 1,200 mm, minimum depth of 390 mm and load capacity of 60 kg. The guides have a locking system when open to prevent involuntary closure. Hinges for joining the boards that make up the table, screws and the leaf with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

The Plasquare 2 cable grommet is characterised by its filament brush that prevents it from being seen through. It measures 95.4 x 45 mm at its base and 101.4 x 51 mm at the top. To install the Plasquare 2, a 95.4 x 45 mm cutout is required to embed it in the furniture, whether at home or in the office. Its rectangular shape allows cables to pass through it to keep them in order. The Plasquare 2 is made of plastic and is available in black and white finishes. The product is delivered packed in lots of 5 pieces.

Read more less

The Lunch extendable system consists of guides for extracting a folding table hidden inside a compartment that could house a drawer. This system is often used in small kitchens where a support base is needed for breakfast and meals, although it can be used in other areas of the home. The Lunch table can be installed in modules with a maximum width of 900 mm and a minimum depth of 540 mm. The system's guides allow the extraction of a surface of 895 mm and a load capacity of 60 kg. The table is made up of 2 boards that are unfolded with the help of hinges, remaining housed in the same compartment of the system once they have finished being used. In addition, they have a safety locking mechanism to prevent the table from being closed accidentally. For assemblies in modules with a width greater than 900 and up to 1,200 mm, a stabilising profile code 2045269 is available. The boards that make up the support surface are not included. Concealed pull-out table system for kitchen environments, 895 mm long. Valid for modules with a width of 900 mm, minimum depth of 540 mm and load capacity of 60 kg. The guides have a locking system when open to prevent involuntary closure. Hinges for joining the boards that make up the table, screws and the leaf with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish. How can I mount a hidden Lunch pull-out table in a drawer? The following video shows how to easily assemble the Lunch mechanism.

Read more less

The table frame with square section legs is made of steel and matches all types of kitchen, home and office furniture. Its assembly is quick and easy as it includes everything you need for its assembly, you just have to add the board you like the most. It also has plastic end caps that serve as a finishing touch to the legs and prevent damage to the floor. 75x75cm: Table structure composed of 4 crossbars with a section of 30x30mm and a length of 650mm, and 4 legs with a section of 50x50mm and a height of 710mm. Designed for 750x750mm tables with a strong and rigid joint between the pieces, allowing for a high load capacity. Easy and quick assembly, as it includes all the components necessary for its installation, except the table top. It has plastic end caps matching the finish, which serve as a finishing touch to the legs and prevent damage to the floor. It is made of steel with a black/white painted finish. 115x75cm: Table structure composed of 4 30x30mm section stringers (2 650mm long and 2 1,050mm long), and 4 legs with 50x50mm section and 710mm height. Designed for 1,150x750mm tables with a strong and rigid joint between the pieces, allowing for a high load capacity. Easy and quick assembly, as it includes all the components necessary for its installation, except the table top. It has plastic end caps matching the finish, which serve as a finishing touch to the legs and prevent damage to the floor. It is made of steel with a black/white painted finish.

Read more less

The Shot system is designed to create an additional extendable table or work surface for the kitchen. Very useful when preparing food or enjoying an aperitif, the Shot system opens and closes in a single movement, and is hidden within the same module, taking up the space of a drawer. The system must be installed in modules with a width between 450 and 1,200 mm and a minimum depth of 560 mm. The system's guides allow the extraction of a surface of 490 mm and a load capacity of 80 kg. They also have a safety locking mechanism to prevent the table from being closed accidentally. The table top that forms the support surface is not included.

Read more less

Oplà Folding+39 M120, a concealed side table system with quick extraction and lifting. This system is intended for use in the living room or home office, as the minimum installation depth is 390 mm. It can also be used in other areas of the home. We manage to extend the surface on which we are working and place it at the same level, adjusting its position to leave it completely flush with the main surface. The system can be installed in modules with a maximum width of 1,200 mm and a minimum depth of 390 mm , thus achieving an extraction surface of 370 mm and a load capacity of 40 kg. The guides are connected by a profile that gives greater stability to the assembly. If we want to mount the system in a module with a width less than 1,200 mm, we will cut this stabilizing profile to adjust it to the required width. In addition, the mechanism has springs that facilitate the lifting movement of the mechanism. The boards that make up the support surface or the front are not included. System for the extraction and elevation of a work surface in environments such as living rooms, home offices and offices, 370 mm long. Valid for modules with a maximum width of 1,200 mm and a minimum width of 450 mm, a minimum depth of 390 mm and a load capacity of 40 kg. It has a stabilising bar, which can be adjusted to the desired width by cutting it. The guides have a locking system when they are open to prevent accidental closing. The system is hidden, both when in use and when not in use. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

The Party table is designed with a folding pull-out system with double telescopic legs. This system is intended for the kitchen, although it can be used in other areas of the home. The Party system can be installed in modules with a width of 900 mm and a minimum depth of 560 mm, thus achieving a table length of 1,380 mm and a load capacity of 100 kg. The table is made up of 3 boards that are unfolded with the help of hinges. The boards are housed in the same space as the mechanism when the table is not in use. The front of the furniture after storing the table must have hinges for opening. The leg is foldable and adjustable in height , and the leg and the guides also have a locking system during use of the table. The boards that make up the support surface are not included. System for the extraction of a 1,380 mm long concealed folding table with double telescopic support leg. Designed for the kitchen, although it can be used in other rooms of the home. Valid for modules with a width of 900 mm and a minimum depth of 560 mm and a load capacity of 100 kg. The guides and the leg have a locking system when open to prevent accidental closure. Hinges for joining the boards that make up the table, screws and the leaf with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

With the Twice Top table you can create an extendable support surface for preparing or enjoying meals. Mainly intended for kitchens with islands or peninsulas measuring 1,200 mm in length and 600 to 900 mm in width. The Twice Top system allows for longitudinal movement of the surface by 600 mm and a load capacity of 60 kg. In addition, they have a locking system to prevent closure during use. The boards that make up the sliding surface are not included. System for longitudinal sliding of a surface on a kitchen island or peninsula. Valid for islands or peninsulas with a length of 1,200 mm and a width of 600 to 900 mm and a load capacity of 60 kg. The guides have a locking system to prevent accidental closure during use. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum and have a matte anodized finish.

Read more less

Cable grommet to be embedded in any office desk or table made of plastic . Ideal for hiding your connections easily.

Read more less

Oplà Folding+39, a concealed side table system with quick extraction and lifting. This system is intended for use in the living room or home office, as the minimum installation depth is 390 mm. It can also be used in other areas of the home. With the Oplà Folding+39 table we can extend the surface on which we are working and place it at the same level, adjusting its position to leave it completely flush with the main surface. The system can be installed in modules with a maximum width of 1,000 mm and a minimum depth of 390 mm , thus achieving an extraction surface of 370 mm and a load capacity of 40 kg. System for the extraction and elevation of a work surface in environments such as living rooms, home offices and offices, 370 mm long. Valid for modules with a maximum width of 1,000 mm and a minimum width of 450 mm, a minimum depth of 390 mm and a load capacity of 40 kg. The guides have a locking system when they are open to prevent accidental closing. The system is hidden, both when in use and when not in use. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

Set of 4 round rod table legs, ideal for multipurpose and kitchen tables. The fixed leg has a height of 710 mm. Its assembly is very simple, screwing the leg to the table top using screws which are included in the supply. It also includes stops to avoid marks on the floor. The legs are made of steel and painted in black or white . Set of fixed rod-shaped legs. You can create multipurpose tables. Leg dimensions: 710 mm high. Includes screws and stoppers to prevent marking on the floor. Made of steel and finished in white or black paint. Load capacity of 40 kg per leg.

Read more less

Set of 2 cross table legs, ideal for kitchen and dining tables. The fixed leg has a height of 695 mm and a width of 695 mm. Its assembly is very simple, screwing the leg to the table top using screws which are included in the supply. It also includes stops to avoid marks on the floor. The legs are made of steel and painted in black or white . Set of fixed legs in the shape of a cross and height 695 mm. Sturdy and stable legs. Leg dimensions: 695mm wide x 695mm high. Includes screws and stoppers to prevent marking on the floor. Made of steel and finished in white or black paint. Load capacity of 80 kg per leg.

Read more less

With the Corner sliding table, enjoy an additional extendable surface for your kitchen island or peninsula, giving it a larger surface and greater utility in a single movement. It can be installed on islands and peninsulas measuring 900 x 900 mm, allowing a diagonal movement of the surface of 300 mm and a load capacity of 60 kg. They also have a locking system to prevent them from closing during use. The boards that make up the sliding surface and the frame are not included. System for diagonal sliding of a surface on a kitchen island or peninsula. Valid for islands or peninsulas with minimum dimensions of 900 x 900 mm and load capacity of 60 kg. The guides have a locking system to prevent accidental closure during use. Screws for installation and sheet with assembly instructions are included. The profiles that make up the guides are made of extruded aluminum with an anodized stainless steel finish.

Read more less

Cable grommet to be embedded in any office desk or table made of plastic . Ideal for hiding your connections easily.

Read more less

Board designed to make a dining table , kitchen table or desk, you just have to add some screwed legs. And depending on the size, it can also be used as a shelf or rack , adding some wall brackets. It is ideal for customizing furniture according to your needs, for example making a custom shelf, an auxiliary office table or a desk for a small room. It is characterised by being a sustainable and environmentally friendly product (FSC and PEFC certification). As for reaction to fire, it complies with the D-s2, d0 classification in accordance with standard EN13986. It is also suitable for indoor use because it complies with standard EN14322 (Wood-based panels - Melamine-coated panels for indoor use). This board is made from high-quality materials that guarantee a long lifespan, with increased resistance to damage. These properties prevent scratches, meaning it will remain in perfect condition for many years. It is easy to clean, stain-resistant and has antibacterial properties. It is made from particle board with a melamine surface and is edged on all four sides with PVC . It is also available in two exclusive finishes, oak effect or high-quality white, both of which are very elegant. Board designed to make a dining table, kitchen table or desk, you just have to add some screwed legs. This board is made from high-quality materials that guarantee a long lifespan, with increased resistance to damage. It is easy to clean, stain-resistant and has antibacterial properties. It is characterized by being a sustainable and environmentally friendly product. As for reaction to fire, it complies with the D-s2, d0 classification and is also suitable for indoor use. It is made of particle board with a melamine surface and is edged on all four sides with PVC. It is also available in a white finish or a high-quality, very elegant oak effect.

Read more less

The Plastwin table cable grommet is designed to hide the cables of electronic devices on desks, office tables or home furniture. Its discreet square design allows for complete integration into the furniture, although for its installation it requires a circular machining of Ø80mm. It has a cover that can be removed to pass the cables and plugs through. Once installed, to access the cables, remove the cover by pulling it slightly upwards. The Plastwin cable grommet is also available in a white or black finish and is supplied in packs of 6 grommets.

Read more less

These square legs are made of steel with a square section of 50x50mm , ideal for all types of kitchen, home and office furniture. They include everything you need for assembly, you just have to add the board you like best. They also have plastic end caps that serve as a finishing touch to the legs and prevent damage to the floor. Table legs with a square section of 50x50mm, ideal for all types of kitchen, home and office furniture. Includes all the components necessary for installation, except the table top. It has plastic end caps matching the finish, which serve as a finishing touch to the legs and prevent damage to the floor. The legs are very sturdy and support a high load capacity. They are made of steel with a black painted finish.

Read more less