Anti-mold Wall Paint Additive - 250 ml format, sufficient to treat large surfaces and guarantee long-lasting protection. - This water-based paint additive is specially formulated to prevent mold growth on interior and exterior walls, keeping your surfaces free of moisture. - It acts effectively against mold, moss, algae, and spores, eliminating them thoroughly and ensuring a healthier environment. - Perfect for spaces where humidity and condensation are a recurring problem, restoring and protecting treated walls. - It mixes easily with water-based paints (pour a 250ml container into a 10/14 litre paint can), improving the paint's properties and offering a quick and practical solution for treating walls affected by moisture. - Suitable for both indoor and outdoor applications, protecting surfaces from moisture and mold on any type of wall. - Article also known as: Anti-mold paint additive, mold-removing additive, water-based paint additive, wall restorer, moisture prevention, condensation treatment, interior-exterior additive, eliminates moss and algae.
Oxide/Minium Converter for Iron - Capacity: 250 Ml. - Converts oxide into an organic metal that adheres to the surface, forming a protective film that allows painting on the item. - It is a water-based rust converter. - It is widely used for the protection of metal surfaces such as doors, gates, gutters, railings, car bodies, household appliances and generally for all iron products. - It should be applied with a brush, undiluted, directly on the rusted parts. - Shake the product before use and pour it into a container. Do not pour unused product into the container. - Allow to dry for at least 12/15 hours and then continue painting with any type of paint. - The yield is approximately 12/15 m2 per litre. - We recommend that you do not use the product at temperatures below 5°C. - The tools used in the application can be cleaned with water. - For its application, the use of gloves, a mask and protective glasses is recommended.
Wolfpack anti-slip spray - Measurement: 200 ml. - This non-slip surface is a specific product for the treatment of surfaces such as stairs, ramps, shower trays, kitchens and floors in general. - Creates a silicone layer that increases its coefficient of friction when in contact with water, reducing the risk of slipping or falling. - Instructions for use: 1. Clean and dry the application surface. 2. Shake the container and apply product evenly from a distance of approximately 30 cm. 3. When finished, invert the canister and press until all the gas comes out to clean the button. - Article known as anti-slip spray stairs, anti-slip bathtub, anti-slip shower, anti-slip ramps, anti-slip floor, anti-slip stairs,
Spray remover removes labels / adhesives / stickers / glues - Capacity 200 ml. - Ideal spray for removing adhesives and glue residue from glass, ceramics, wood, metals and various types of plastic materials. - Apply the product on the glue residue and leave it to act. - Remove the product with a clean cloth that is free of lint and dirt. - High dissolution properties. - Leaves no residue. - Slow evaporation. - Non-corrosive. - For its application, the use of gloves, a mask and protective glasses is recommended.
Gas leak detector spray - Capacity: 300 ml. - Ideal for locating gas or compressed air leaks in pipes, compressors, pressure pumps, etc. - Non-toxic and non-harmful product for the environment and people, - Does not stain or rust. - For its application, the use of gloves, a mask and protective glasses is recommended.
Air conditioning sanitizing spray - Capacity: 400 ml. - Disinfects surfaces in a matter of minutes by acting on contact. - Instantly reduces odors, both organic and inorganic, lasting for a long period of time. - After being applied, the split and the ducts, it ensures a pleasant fragrance. - Especially suitable for the home. - For its application, the use of gloves, a mask and protective glasses is recommended.
Spray primer 400 ml. - It is used only to increase paint adhesion. - Once this primer is applied, it will not allow the paint to be removed. - 400 ml bottle. - For its application, the use of gloves, a mask and protective glasses is recommended.
Spray fixative base for plastics - Capacity: 400 ml. - Primer with excellent adhesion on plastics, wood and ceramics. - Promotes the anchoring of other surface coatings on materials with little adhesive power such as polycarbonate, polypropylene or similar materials. - Color: transparent. - For its application, the use of gloves, a mask and protective glasses is recommended.
High Temperature Spray Paint White 400 ml. - High temperature resistant. - Suitable for painting silencers, radiators, boilers and other items that are subject to heat and high temperatures. - Instructions for use: Before applying, the surface must be cold and degreased. After use, allow the surface to dry slowly, keeping it cold at all times. - Measurement: 400 ml. - For its application, the use of gloves, a mask and protective glasses is recommended.
Maurer glue spray 400 ml. - Measurement: 400 ml. - Special spray glue for gluing either permanently or temporarily. - Ideal for rubber, fabrics, leather, metal, wood, carpet and cork installation, paper, cardboard and various types of plastic. - Quick and clean application. Long-lasting bond. Dries quickly. - Adjustable spray width approx. 10cm. - Instructions for use: > Shake before use. > The surface must be clean, dry and free of grease. > Spray from a distance of approx. 20 to 25 cm. > For polystyrene foam (Styrofoam) keep a greater distance. For permanent use, apply the glue on both surfaces. > Let it rest for about 15 to 20 minutes and then mix tightly. > For temporary use, treat only one of the parts to be joined, allow to dry for 5-10 minutes and then join firmly. - For its application, the use of gloves, a mask and protective glasses is recommended.
Lubricant Spray for Weapons 200 ml. - Lubricating spray to unclog weapons. - With antioxidant power. - Measurement: 200 ml. - For its application, the use of gloves, a mask and protective glasses is recommended. - Article known as grease, oil or gun lubricants.
Leather fabric waterproofing spray. - Spray to waterproof footwear, fabrics, etc. - Recommended for all types of fabrics. - Measurement: 400 ml. - For its application, the use of gloves, a mask and protective glasses is recommended.
High temperature matte black spray. - 400 ml bottle. - Suitable for painting silencers, radiators, boilers and other items that are subject to heat and high temperatures. - Contains silicone resin and is resistant to temperatures up to 800º C. - Thanks to these technical characteristics, it is suitable for painting silencers, radiators, boilers and other items that are subjected to high temperatures. - Instructions for use: before applying, the surface must be cold and degreased. - After use, allow the surface to dry slowly, keeping it always cold. - For its application, the use of gloves, a mask and protective glasses is recommended.
High temperature aluminum spray. - 400 ml bottle. - Suitable for painting silencers, radiators, boilers and other items that are subject to heat and high temperatures. - Contains silicone resin and is resistant to temperatures up to 800º C. - Thanks to these technical characteristics, it is suitable for painting silencers, radiators, boilers and other items that are subjected to high temperatures. - Instructions for use: before applying, the surface must be cold and degreased. - After use, allow the surface to dry slowly, keeping it cool at all times. - For its application, the use of gloves, a mask and protective glasses is recommended.
Anti-rust primer spray. - 400 ml bottle. - Protect metal surfaces from rust. - Possibility of repainting after the first layer has dried - Acrylic resins allow for indoor and outdoor use, ensuring resistance to atmospheric agents. - Article also known as: spray paint, spray paint. - For its application, the use of gloves, a mask and protective glasses is recommended.
