He 12V DC constant voltage converter is designed for luminaires of technology LED of constant tension and is characterized by its protection against overheating and short circuits.
It has interchangeable cable offering the possibility of connecting another cable to the converter with a different plug, depending on the market it is intended for.
The housing is made of black plastic with class II protection, it has a 6-output MINILED distributor and a 2-meter power cable.
Version 72W 12v:
Constant voltage converter for LED technology fixtures.
Power 72W.
Input 100-240V AC - 50-60Hz.
Output 12V DC.
Suitable for dry areas, IP20.
Includes 6-output MINILED distributor.
Cable length 2 m.
Allows you to connect another cable with a different plug (depending on the market).
Made of plastic with a black finish.
Version 50W 12v:
Constant voltage converter for LED technology fixtures.
Power 50W.
Input 100-240V AC - 50-60Hz.
Output 12V DC.
Suitable for dry areas, IP20.
Includes 6-output MINILED distributor.
Cable length 2 m.
Allows you to connect another cable with a different plug (depending on the market).
Made of plastic with a black finish.
Version 6W 12v:
Constant voltage converter for LED technology fixtures.
Power 6W.
Input 180-240V AC - 50Hz.
Output 12V DC.
Suitable for dry areas, IP20.
Includes 6-output MINILED distributor.
Cable length 2 m.
Allows you to connect another cable with a different plug (depending on the market).
Made of plastic with a black finish.
Version 15W 24v:
24V DC constant voltage LED converter ideal for operating LED lights, such as the Neon Lynx strip or the Lynx 24V strips.
Constant voltage converter for LED technology fixtures.
Power 15 W.
Input 180-240V AC - 50Hz.
Output 24V DC.
Suitable for dry areas, IP20.
Includes 6-outlet AMP distributor.
Cable length 2 m.
Allows you to connect another cable with a different plug (depending on the market).
Made of plastic with a white finish.
FAQs - Frequently Asked Questions
What is the maximum power and how is it distributed among the MiniLED outputs of the converter?
This converter has a maximum power of 60W with 12V DC output, distributed among its 6 MiniLED outputs, allowing multiple LED devices to be connected simultaneously.
What features make this converter suitable for projects in dry areas (IP20)?
The converter is designed with IP20 protection, ideal for dry areas, and features an efficient power factor that optimizes energy consumption in lighting projects.
How compatible is the converter with standard plugs and how do I connect it?
It's compatible with Type C plugs and IEC 60320 C7 connectors, offering flexible connectivity thanks to its 2-meter power cable. It also allows you to connect other cables for different outlets.
What are the dimensions of the converter and what advantages does it offer for installation?
With compact dimensions of just 16.5 mm thick, the converter can be easily hidden in tight spaces or behind furniture, maximizing available space.
What safety measures does the converter include against overheating or short circuits?
It incorporates protection against overloads, electrical interference, and short circuits, ensuring safe and stable operation, even in intensive usage scenarios.
The Polux LED lighted closet bar has a motion sensor that makes it easy to turn on and off by detecting movement with a detection range of less than 1.5 meters. The light will turn off within 45 seconds after no movement is detected. It can be installed in a 558 mm closet space and can be adapted to smaller spaces by cutting the bar. Its assembly consists of screwing the bar to the sides of the space where it is installed. The materials used are matte anodized aluminum and rubber to reduce the noise of the hangers. It allows a 12 V DC power input, requires a 12 V converter that is not included.
Integrated motion sensor that turns on when approaching within 1.5m and turns off the light after 45 seconds after leaving the detection zone
Power supply: 12V DC. Requires a 12V LED converter for installation (not included in the supply).
Valid for an interior cupboard gap of between 708-858mm. The tube can be cut to adapt it to the required measurement.
Matte anodized aluminum bar with semi-rigid PVC rubber to prevent noise from the hangers.
Very easy installation thanks to the side brackets and mounting screws included.
Sensor detection range: 1.5 meters.
Sensor detection angle: 90°.
Number of LEDs: 50.
Color temperature: Natural white (4,000K).
Luminous flux / Brightness: 190 lm.
Power: 4W.
Lighting angle: 120°.
Protection class: IP20.
Energy rating A.
The Kaus LED luminaire is designed as lighting for kitchens and cupboards without the need for cables, with an elegant, extra-thin aluminium design. With this LED light you can illuminate the inside of your cupboards, the kitchen counter or the passageways of your home, with a warm, natural or cold white colour , as it allows you to vary the colour temperature. It is also a dimmable luminaire with which you can increase or reduce the luminous flux.
(Motion) It has an integrated twilight motion sensor that turns on the luminaire when it detects movement of people within its detection range (2 meters in length and an angle of 120º) and turns off automatically when it stops detecting movement, after 18 seconds. It also has a switch to turn the luminaire on or off manually.
(Proximity) It has an integrated proximity sensor that turns on the light when you pass your hand within its 7 cm detection range and turns off automatically when you pass your hand again. It also has a switch to turn the light on or off manually.
This luminaire has a rechargeable battery 850mAh lithium polymer battery with an autonomy of 400 18-second ignition cycles before the battery runs out. It is recommended to recharge the luminaire with a conventional mobile charger 5V DC 1A (not included) and a 30cm micro USB Type-C cable (included). The estimated full charge time is less than 2 hours, but varies depending on the size of the luminaire and the amperage of the charger. To check the charging status, it has an LED indicator that changes from red to green when charging is complete.
His Installation is very easy and simple , you just have to stick some adhesive metal bases on the surface of the furniture, without the need for cables or holes. The magnets incorporated inside allow it to adhere to the plates magnetically, and in this way the light can be easily removed for recharging.
LED luminaire that allows lighting for kitchens and cupboards without the need for cables, with an elegant extra-thin design and a length of 240/400/600mm.
It has an integrated twilight motion sensor that turns on the light when it detects movement of people within its detection range (2 m in length and 120º angle) and turns off automatically when it stops detecting movement, after 18 seconds.
The twilight sensor activates the light when the ambient light is below 250Lux, which extends battery life as it only turns on when really necessary.
It has a rechargeable 850mAh lithium polymer battery with a duration of 400 18-second ignition cycles, as well as a switch to turn it on or off manually.
The battery can be recharged with a conventional 5V DC 1A mobile charger (not included) and a 30cm micro USB type C cable (included), in less than 2 hours (LED charging status indicator).
Its installation is very simple, you just have to stick some adhesive metal bases to the furniture and the light fixture adheres magnetically, so it can be easily removed for recharging.
Screws and adhesive tape required for assembly are included.
Low-consumption LED technology.
Luminous flux of 60 lumens.
Power 1/2/3W.
Variable white colour temperature 3,000 - 4,000 - 6,000 Kelvin. Can be adjusted by pressing the side button or passing your hand over the sensor twice in a row.
150º light beam.
Luminaire suitable for dry areas, IP 20.
It is made of aluminum and plastic with a matte anodized finish.
FAQs - Frequently Asked Questions:
Can the Kaus luminaire be recharged with a mobile phone charger?
Yes, the Kaus luminaire can be recharged using a mobile phone charger. The charger must have a micro USB type C connector and must supply at least 5V DC 1A.
How long does it take to charge the Kaus luminaire?
Charging time will vary depending on the charger amperage. It is recommended to use 5V DC 1A chargers, so the estimated charging time is 2 hours.
How many cycles does the Kaus luminaire last to charge?
This light has an autonomy of 400 ignition cycles per charge before the battery runs out and has an LED indicator that changes from red to green when the charge is complete after approximately 2 hours.
The Octans RGB LED strip is controlled by infrared remote control or by the Smart Life application via WIFI , compatible with IOS and Android.
This app is compatible with Alexa and Google Home , which means you can control the LED strip with your voice . You can also synchronize the lighting with the rhythm of the music , changing the color and flashing according to the ambient sound.
This kit is designed to be installed in a variety of places such as the living room, bedroom, kitchen, ceiling, stairs or even in shops and businesses. It is widely used to illuminate TVs and gamer monitors , ideal for video game enthusiasts.
It has multiple color combinations to create different scenes. It is also dimmable to adjust the brightness of the LED strip and create a unique ambient atmosphere.
It is supplied in a roll of 4 0.5m LED strips joined together by a cable, with adhesive for fixing. And it is connected with quick-connect cables for easy installation without advanced knowledge.
The kit consists of a LED strip, an infrared remote control, a WIFI controller/IR receiver and a USB power cable for recharging with a 5V DC mobile phone charger.
The Octans RGB LED strip is controlled by infrared remote control or via the Smart Life app via WIFI.
It is compatible with Alexa and Google Home from the Smart Life app, which means you can control the LED strip with your voice.
RGB lighting can be synchronized with the rhythm of music, via the Smart Life application and with manual control.
Supplied in a roll of 4 0.5m RGB LED strips linked together by a cable, includes a 20cm power USB cable and quick-connect cables for easy installation without advanced knowledge.
It has an infrared remote control with multiple options and a button to synchronize the light with the music.
FAQs
Are Octans RGB kits compatible with Alexa and Google Home?
Yes, they are compatible with Alexa and Google Home. To do this, the RGB LED strip must be linked to the Smart Home application and this in turn with Alexa or Google Home.
The Rigel LED light is designed to illuminate the inside of your furniture drawers. It has a sensor that detects the vibration of the drawer when it is opened and turns the light on for 12 seconds and then turns off automatically thanks to its timer. In this way, the light allows the inside of the drawer to be illuminated while it is open with a natural white light.
This light has a rechargeable 850mAh lithium polymer battery with a lifespan of 600 ignition cycles before the battery runs out. It is recommended to recharge the light with a conventional 5V DC 0.5A mobile phone charger with a micro USB type B connector (not included). The estimated full charge time is 2 hours, but varies depending on the amperage of the charger. To check the charging status, it has an LED indicator that changes from red to green when the charge is complete. It also has a switch to turn the light on or off manually.
Its installation in the drawer is very easy and simple , and the light can be removed for recharging. It can be fixed using a screwed base or with a metal plate with a magnet (both included) that is fixed with double-sided tape so as not to drill holes in the drawer. With this light we avoid complicated electrical installations in drawers or in places where we do not have an electrical installation.
Designed to illuminate the interior of drawers.
Low-consumption LED technology.
Cordless Lighting System: 850mAh rechargeable lithium polymer battery, rechargeable with a 5V DC 0.5A mobile phone charger with micro USB type B connector.
Autonomy of 600 ignition cycles per charge before the battery runs out (LED charge status indicator).
Installation on the surface of the furniture with the screw-on base or with the adhesive magnet, and can be easily disassembled for recharging.
It has a sensor that is activated by vibration when opening the drawer.
12 second timer to turn off the light.
It is mounted on the bottom of the drawer using screws or double-sided adhesive tape.
Screws and adhesive tape required for assembly are included.
Luminous flux of 75 lumens.
Power 1 W.
Natural white colour temperature with 4,000 Kelvin.
It has 10 LEDs.
90º light beam.
Luminaire suitable for dry areas, IP 20.
Made of plastic with metallic grey finish.
FAQs - Frequently Asked Questions
Can the Rigel luminaire be recharged with a mobile phone charger?
Yes, the Rigel luminaire can be recharged using a mobile phone charger. The charger must have a micro USB type B connector and must supply at least 5V DC 0.5A.
How long does it take to charge the Rigel light?
Charging time will vary depending on the charger amperage. It is recommended to use 5V DC 1A chargers, so the estimated charging time is 2 hours.
How many cycles does the Rigel luminaire last to charge?
This light has a battery life of 600 ignition cycles per charge before the battery runs out and has an LED indicator that changes from red to green when the charge is complete after approximately 2 hours.
Decorative LED wall light ideal for lighting the inside of your cupboards and furniture thanks to its matte diffuser that homogenizes the light . Its great advantage is that it does not require an additional converter since it works at 230V AC . It also has low consumption LED technology and a natural white color temperature of 4000ºK . This luminaire is available in 2 different sizes (D.66 mm and D.84 mm) with different finishes in metallic grey, matt black and satin nickel . It is designed for recessed mounting in the furniture, which only requires prior machining. It also includes a connection box for easy and safe installation that is supplied unconnected to simplify assembly.
Decorative furniture light with low-consumption LED technology.
It does not require an additional converter as it operates at 230V.
Natural white colour temperature 4,000K and energy efficiency class G.
Diameter of 84 mm. For installation, a pre-drilled hole of D.78 mm is required.
Power of 5.2W with 71 LEDs.
Luminous flux/brightness: 380 lm.
Made of steel and plastic with a matte black finish.
Rechargeable LED wall light with motion detector made of plastic with a metallic gray finish and is perfect for interior lighting of home furniture or transit areas: laundry room, garage, stairs, children's room, hallway, etc.
The integrated motion sensor , with a detection range of 2 meters in length at a 120º angle, keeps the luminaire on while it detects movement and turns off after 30 seconds when it stops detecting it.
This light features a rechargeable 850mAh lithium-polymer battery . Charging time varies depending on the charger's amperage, although we recommend using a 5V DC 1A charger with a micro USB type B connector for an estimated charging time of 2 to 2.5 hours. It has a battery life of 360 on-off cycles per charge before the battery runs out and has an LED charging status indicator that turns from red to green when fully charged.
Installation on the surface of the furniture by screwing the base or using an adhesive magnet (both included), and can be easily removed for recharging.
Low-consumption LED technology.
Integrated motion sensor: keeps the light on while it detects movement and turns off after 30 seconds when it stops detecting it.
Sensor detection range: 120°, 2 meters.
Wireless Lighting System: 850mAh rechargeable lithium polymer battery, rechargeable with a 5V DC 1A mobile phone charger with a micro USB type B connector.
360 power cycles per charge before the battery runs out.
LED charging status indicator.
Mounts on furniture surfaces using the screw-on base or adhesive magnet, and can be easily removed for recharging.
Number of LEDs: 9.
Color temperature: Natural white (4,000K).
Luminous flux / Brightness: 85 lm.
Power: 1W.
Lighting angle: 160 degrees.
Protection level: IP20.
FAQs - Frequently Asked Questions
Can the Kraz light be recharged with a mobile phone charger?
Yes, the Kaz light can be recharged with a mobile phone charger. The charger must have a micro USB type B connector and supply at least 5V DC.
How long does it take to charge the Kraz light?
Charging time will vary depending on the charger's amperage. 5V DC 1A chargers are recommended, so the estimated charging time is 2 to 2.5 hours.
How many cycles does the Kraz luminaire last?
This light has a battery life of 360 on-off cycles per charge before running out of power. It features an LED indicator that changes from red to green when fully charged after approximately 2.5 hours.
How does the motion sensor integrated into the Kraz LED luminaire work and what is its detection range?
The integrated motion sensor detects movement within a range of 2 meters and a 120° angle. The light automatically turns on when motion is detected and turns off 30 seconds after no activity is detected.
What type of rechargeable battery does the light use and how long does it take to fully charge?
The light uses a rechargeable lithium-polymer battery with a capacity of 850 mAh. The estimated charging time is 2 to 2.5 hours using a 5V DC 1A charger with a micro USB type B connector.
What installation options are available and how can the luminaire be securely attached?
The light can be mounted with screws on a piece of furniture or with an included adhesive magnet, allowing it to be easily removed for recharging. Both options are safe and practical.
What does the charging status LED indicate and how do I know when the battery is fully charged?
The charging status LED indicates that the battery is charging when it's on. When the LED turns off, the battery is fully charged and ready for use.
In what types of applications and environments is this luminaire ideal for use, considering its design and specifications?
This luminaire is ideal for high-traffic areas such as hallways, closets, laundry rooms, or stairwells, thanks to its compact design, natural white light (4000K), and motion sensor. Its simple installation and 360-cycle runtime make it perfect for areas without direct access to electricity.
Switch for turning the lights on and off manually . It is designed for discreet installation in home and office furniture, thanks to its small size. It is designed to be embedded in the surface of the furniture, remaining integrated. For its assembly, a previous hole of D. 21 mm and 21 mm deep is required.
The Airtop 2 is a hidden wireless charger that allows you to charge your electronic devices compatible with QI wireless charging technology quickly and efficiently. It can be installed on the underside of an office table or wooden surface, remaining invisible in the furniture.
By using QI wireless charging technology , there is no need to connect any cables, making charging easier and tangle-free. It features overcharge protection, ensuring that devices are always safe and protected while charging wirelessly.
In short, Airtop 2 QI wireless charger is an excellent charging solution for anyone looking for a fast and efficient way to charge their electronic devices.
Hidden wireless charger that allows you to charge electronic devices compatible with QI wireless charging technology, without the need for cables.
It is designed for integration and installation in home and office furniture, under a table or wooden surface, remaining hidden from view.
For its installation, it is necessary to perform a non-through machining of D. 60 mm, in order to be able to embed the device and so that the distance between the charger and the device does not exceed 2 mm.
It comes with an adhesive sticker to identify the position of the device and carry out efficient charging, and also includes a 5V charger with a 1.5m cable.
It is made of black plastic, with overload protection, which ensures that devices are always safe and protected while charging.
Switch for turning lights on and off automatically when doors are opened and closed. This way, the light is switched on when the door is opened and switched off when the door is closed. It is designed for discreet installation in home and office furniture, thanks to its small size and easy mounting by screwing it onto the surface of the furniture. In addition, the door switch is suitable for furniture with both folding and sliding doors.
The Surface Airtop 2 is a wireless charger that allows you to charge your electronic devices compatible with QI wireless charging technology quickly and efficiently. Its sleek and compact design makes it ideal for home, office or anywhere where wireless charging is required. By using QI wireless charging technology , there is no need to connect any cables, making charging easier and tangle-free. Moreover, the Surface Airtop 2 charger features a USB-A port and a charging LED indicator. It features overcharge protection, ensuring that devices are always safe and protected while charging wired or wirelessly.
In short, Airtop 2 QI wireless charger is an excellent charging solution for anyone looking for a fast and efficient way to charge their electronic devices.
The SIMPLE LED Point door sensor is a proximity sensor that works at 240V AC. Its main feature is the small size of its head. This sensor switches the light on and off by proximity when its 3 cm detection range is interfered with, such as when a cupboard door is closed. This proximity sensor is specially designed to be placed on furniture and cupboard doors, which makes it work through the opening and closing movement of the doors. It has a power cable with a TYPE 8 plug to connect directly to the converter. And the head cables are 1.5 meters long.
LED wall light supplied in a pack of 6 units with all the accessories required for assembly. It is made of aluminium with a matt anodised finish and is perfect for interior lighting of furniture or cupboards. Thanks to its small size, this LED spotlight is ideal for integration into furniture, as it only protrudes 1 mm from the installation surface. Recessed mounting requires a 16 mm diameter machining. A 15W constant voltage converter is also supplied for connection to the mains.
Switch for turning the lights on and off manually . It is designed for discreet installation in home and office furniture, thanks to its small size. It is designed to be embedded in the surface of the furniture, remaining integrated. For its assembly, a previous hole of D. 21 mm and 21 mm deep is required.
The Red Eye 4 sensor is a motion detection system with a timer . It turns on when its detection range is interfered with and turns off once the programmed time has elapsed, since the timer it includes is adjustable between 10 seconds and 3 minutes. The detection range of the sensor is 2.5 meters.
The DOUBLE Point door LED sensor is a proximity sensor that operates at 240V AC. Its main feature is the small size of its head. This sensor switches the luminaire on and off by proximity when its 3 cm detection range is interfered with, such as when a cupboard door is closed. It is a switched sensor that has two detectors to be able to switch the luminaire on and off from different points, for example in cupboards with independent modules. It has a power cable with a TYPE 8 plug to connect directly to the converter. And the head cables are 1.5 metres long.
Switch for turning lights on and off automatically when doors are opened and closed. This way, the light is switched on when the door is opened and switched off when the door is closed. It is designed for discreet installation in home and office furniture, thanks to its small size and easy mounting by screwing it onto the surface of the furniture. In addition, the door switch is suitable for furniture with both folding and sliding doors.
Switch for turning the lights on and off manually . It is designed for discreet installation in home and office furniture, thanks to its small size. It is designed to be embedded in the surface of the furniture, remaining integrated. For its assembly, a previous hole of D. 21 mm and 21 mm deep is required.
The SIMPLE LED Point switch sensor is a switch sensor that operates at 240V AC. Its main feature is the small size of its head. This sensor switches the luminaire on and off by proximity when its 3 cm detection range is interfered with. It has a power cable with a TYPE 8 plug to connect directly to the converter. And the head cables are 1.5 meters long.
Proximity detection system for switching an LED light on and off.
The sensor turns the LED light on and off when interference occurs within its 3cm sensing range.
Its main feature is the small size of its head with a 1.5 m long cable.
It has a power cable with a TYPE 8 plug to connect directly to the converter.
It operates at 240V AC and is made of plastic.
LED Wall Light Lantern With Switch - Measurements: 115x75 mm. - Flashlight with 2 front LED strips that provide 250 lumens. - To turn the flashlight on or off you have to press the button. - It can be fixed in 3 different ways, by screwing it to the wall, using a magnet on a metal surface or with the double-sided adhesive sticker. - Works with 4 AAA batteries. (Not included) - This item is known as closet light, hallway light, pantry light, garden light, barbecue light, light with magnet
