Catálogo de herrajes y accesorios profesionales para muebles, mesas, cocinas y armarios: bisagras, guías de cajón, tiradores, colgadores, escuadras, perfiles y sistemas correderos. Stock actualizado, descuentos por cantidad y envío en 48–72 h.
Herrajes y accesorios: bisagras, guías, tiradores y sistemas correderos
En esta guía encontrarás criterios de elección, preguntas frecuentes, opciones de instalación y materiales de la categoría Herrajes y accesorios.
Guía de uso
Define el uso y la carga: puerta batiente (bisagras), cajón (guías según capacidad y profundidad), refuerzo estructural (escuadras/placas), módulo alto (colgadores regulables), cocina (perfiles/zócalos) y armarios (accesorios interiores).
Medición esencial: en bisagras, cazoleta habitual Ø35 mm y solape; en guías, longitud compatible con el mueble y carga; en tiradores, intereje correcto; en escuadras, tamaño del ala y número de agujeros. Presenta, marca y realiza pretaladros en maderas densas.
Montaje preciso: apriete progresivo, verificación de escuadre y ajustes finos (vertical, horizontal, profundidad). En herraje visto, cuida el acabado (niquelado/cromado) y usa tornillería adecuada para evitar holguras.
Preguntas frecuentes
¿Cómo elijo entre bisagra, guía o escuadra?
Bisagra para puertas batientes; guía para cajones según carga y longitud; escuadra/placa para unir o reforzar tableros y esquinas. Decide por tipo de esfuerzo y apertura.
¿Qué debo comprobar en las guías de cajón?
Profundidad compatible con el módulo, capacidad de carga, extracción total y sistema de cierre suave. Alinea ambas guías y verifica el escuadre antes del apriete final.
¿Qué intereje de tirador necesito?
La distancia entre agujeros del frente (p. ej., 96/128 mm). Usa tornillos M4 incluidos o equivalentes, sin forzar el acabado.
¿Qué acabado de herraje elegir?
Zincado/bicromatado para interior estándar, niquelado/cromado para herraje visto. En ambientes exigentes, prioriza acabados más resistentes a la oxidación.
¿Cómo refuerzo una balda que vence?
Instala escuadras en L con ala larga al montante y ala corta a la balda, usando tornillos para madera que ajusten al diámetro del agujero sin holgura.
Instalación y fijación
Instalación y fijación: atornillado en madera/metal (tirafondo, M4/M5 según pieza); cazoleta Ø35 mm en bisagras de mueble; guías atornilladas al lateral; colgadores con pletina a pared resistente.
Materiales
Acero cincado/niquelado y zamak en herraje visto; aluminio en perfiles y tiradores; polímeros técnicos (ABS/PA) en accesorios; acabados aptos para interior doméstico.
Selecciona por tipo, medida/intereje, capacidad/carga y acabado para asegurar compatibilidad y reducir holguras. Trabajamos con marcas como Emuca y Wolfpack, con stock real, precios por volumen y entrega 48–72 h. Nuestro bloque técnico incluye guía de elección y preguntas frecuentes.
Para proyectos concretos, accede directamente a nuestras categorías específicas: herrajes para muebles, herrajes para mesas, herrajes y perfiles para cocina, armarios y vestidores o sistemas de puertas correderas.
Herrajes más demandados para muebles de cocina, baño y hogar:
Selección de herrajes y accesorios más utilizados en montaje y reposición: escuadras, colgadores, sistemas correderos, guías y elementos de fijación. Productos con stock disponible y envío rápido.
Pack of chair and furniture pads, floor protectors for furniture legs.
⚪ -Savings pack of 1000 protectors, units in a bag.
⚪ -Permanent fixing to furniture using a spike.
⚪ -Reduces friction and wear on floors, terrazzo, wood, parquet, etc.
⚪ -Reduces dragging noises, improves sliding, without being slippery.
⚪ -Increases furniture conservation by reducing tensile stresses.
⚪ -Wide variety of uses, easy assembly, usable on any chair or furniture
⚪ -Quality finish, no burrs, smoothed and durable material.
⚪ -Ideal for businesses and companies, save by buying in bulk to protect your furniture and flooring.
Includes a 4-unit sample outside the packaging, so you can check if it's the product you need before opening the contents.
Pack of floor protectors for chair and furniture legs. These chair pads protect any type of floor from scratches, abrasion, and noise, improving the durability of your floor and furniture, and improving glide without being slippery. Durable spike fixation guarantees a long service life. PVC material. Available in white and brown. Outer diameter: 18 mm, spike length: 13 mm.
B0DHH2YNJW
B0DHDFM7J8
Free shipping at VicHome.
🔩A practical and economical solution to renew your old furniture or your new kitchen.
🔩Easy installation, "Clip" coupling system for simple and quick assembly between base and hinge.
🔩Base with 3D adjustment, allows precise adjustment between doors and prevents friction.
🔩Made in Spain, complying with ISO 9001 quality and durability standards.
🔩Standard bowl and base measurements commonly used.
🔩This set contains four cup hinges, with their adjustable bases included.
4x Hinges for wooden kitchen doors, 35 mm straight cup, furniture cabinets, kitchens, bathrooms, home, opening 110 degrees, including adjustable bases
A practical and economical solution to renew your old furniture or your new kitchen.
Easy installation, "Clip" coupling system for quick and easy assembly between base and hinge.
Base with 3D adjustment, allows precise adjustment between doors and prevents friction.
Manufactured in Spain, complying with ISO 9001 quality and durability standards.
Standard bowl and base measurements commonly used.
Regulation on three axes.
Adjustable on three axes using the adjustment screws, you will only need a Phillips screwdriver.
It provides a good finish to the furniture and prevents rubbing or knocking between doors.
Adjustable base and easy installation.
The bases include additional adjustment for optimal results, without friction or misalignment between doors. They use the "clip" system to attach to the hinge.
Straight type hinge.
These hinges are of the "straight" type. They are used when the door covers the entire edge of the furniture.
Bottom line.
An optimal and functional result is achieved by choosing the right hinges.
Please read the description and drawings carefully to check that this is the product you need:
Set of four hinges with opening of 110 degrees , type straight , with adjustable type mounting bases ,
"Clip" system for the union of base and hinge.
Ideal for replacing damaged or aging hinges, or for your new kitchen project, quickly and economically.
Valid to replace those used throughout life in kitchens, bathrooms and closets, they use the standard bowl size of 35mm.
Please check the images to make sure your hinges are using the "straight" measurement.
Characteristics:
Width (in mm): 60. Diameter (in mm): 35. Length (in mm): 110. Height (in mm): 114.
Adjustable depth: Yeah. Hydraulic closure: No. Minimum door thickness (in mm): 16
Height adjustable: Yeah. Laterally adjustable: Yeah. Product finish: Nickel plated. Material: Steel.
Hinge type: Straight . Number of pieces: 4 Fixation: Screw in . Clip fixing: Yeah
Maximum opening angle (in °): 110. Drilling diameter (in mm): 35 Product Type: Cup Hinge.
Origin: National.
This pack contains: -4 hinges. -4 bases.
This product contains small parts, keep out of reach of children.
🛡 Brackets for reinforcing furniture, cabinets, shelves or unstable furniture.
🔩 Includes a 6.5 mm central hole for anchoring to a wall or furniture.
💧 Durability, zinc-plated steel that resists moisture and corrosion.
📐 Wide variety of uses, screwable to any wooden surface.
Business and company pack, save by buying in quantity.
Set of triangular metal bracket plates to reinforce and fix furniture, cabinets, dressers, frames, shelves, tables, etc. Increases structural stability. It has 5 holes for a uniform installation, also includes a central hole to screw to walls or other furniture. Wide variety of uses, screwable to any wooden surface. Dimensions: 90 mm x 69 mm x 69 mm, thickness 0.5 mm. Zinc finish. Screws not included. Ideal for businesses and companies. Save by buying in quantity.
- Block copolymer polypropylene material
- Resistant and elastic
- For plastic and aluminum skirting boards and baseboards
- For business and companies, save by buying in quantity
Sambeat solutions. Material: Polypropylene Block Copolymer. Finish: Black. Manufacturing process: Plastic injection.
Package Dimensions : 10 x 10 x 1 cm; 78 g
Manufacturer : Sambeat
ASIN : B0DJPQXNPH
Manufacturer reference : PSAN
Country of origin: Spain
Product Features
It consists of 2 plinth bars at 2.35 m.
Includes 2 90º joining accessories and 2 flexible joints.
Height 100/150 mm.
Plastic with black or aluminum finish.
Kitchen skirting board kit formed by 2 plinth bars and the connecting accessories to provide a practical and aesthetic solution to your kitchen. Protects the lower kitchen cabinets from damage and from the penetration of liquids and dust into the space between the cabinets and the floor.
The plinth bars are supplied in 2.35 meters long and with integrated seal and are resistant to moisture, chemical agents and UV rays. The joining accessories consist of 2 joints to form 90º angles and 2 flexible joints for added versatility and to be able to adjust the skirting boards to any angle. Both the skirting board bars and the accessories are supplied in Two heights (100 mm and 150 mm) , are made of PVC and are incorporated in two finishes, in satin and black anodized finish . The satin anodized finish is supplied with protective plastic film.
Emuca - System for 2 supported wooden sliding doors, soft close, panels not included, Steel and aluminum, anodized
Flow sliding system in kit format for supported wooden doors. This kit includes all the necessary accessories for installing a two-door unit, except for the panels. The kit includes two soft-close devices for each door, providing cushioned opening and closing. It is designed for doors weighing up to 30 kg. The trolleys are made of steel and plastic with ball-bearing wheels that make the system glide smoothly. The trolleys also have an adjustment lock that is activated by a simple turn of a screw, in addition to having a 6 mm height adjustment. Its assembly is simple since the machining to be performed is the same on both the top and bottom of the furniture, since this system uses the same rail, which is designed in aluminum.
System for 2 wooden doors supported by an upper guide designed for installation in furniture.
Supplied in kit format, the packaging includes everything necessary for assembly in the furniture except the boards.
Both upper and lower carriages include ball bearings and 6mm adjustment as well as a lock.
The kit includes 2 soft-closing devices for each door designed for doors up to 30 kg.
Includes four 2.35m anodized aluminum profiles; two for each door, as the top one is identical to the bottom one.
