Herramientas de apriete: sargentos/torniquetes DIN 5117, mordazas para taladro y tornillos de banco (fijos y giratorios) para carpintería, metal y taller—sujeción firme, precisa y segura.
Steel vice - Made of steel. - Jaw width: 125 mm. - Serrated jaws for optimal gripping of objects. - 10 x 12 cm base with 2 anchoring holes. - Jaw opening up to 9.5 cm. - Incorporates an anvil at the base of the 6x4 cm screw. - Article known as parallel vice, table clamp, workshop vice, pipe vice, table vice, rotating table vice, clamping vice, bench clamp.
Wooden handle tourniquets. - Dimensions: 300 x 80 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Mordaza de sujeción PCE-SJJ013, para sujetar distintos materiales como chapado de madera, vidrio y cuero, con una fuerza máxima de 5000 N. Para el banco de pruebas PCE-FTS50.
1 x Mordaza de sujeción PCE-SJJ013
Mordaza de sujeción PCE-SJJ05, para sujetar distintos materiales como
papel y cuero, con una fuerza máxima de 5000 N, para el banco de prueba
PCE-FTS50.
Mordaza de sujeción PCE-SJJ011, para sujetar distintos materiales como
alambre y cable, con una fuerza máxima de 5000 N. Para el banco de
pruebas PCE-FTS50.
Steel vice - Made of steel. - Jaw width: 80 mm. - Grooved jaws for optimal grip on objects. - 10 x 12 cm base with 2 anchoring holes. - Jaw opening up to 9.5 cm. - Incorporates an anvil at the base of the 6x4 cm screw. - Article known as parallel vice, bench vice, workshop vice, pipe vice, bench bench, swivel bench, clamping screw, bench clamp, bench vises, clamps, table clamps, workshop vises, clamping screws, table benches, bench clamps, etc.
Steel vice - Made of steel. - Jaw width: 150 mm. - Serrated jaws for optimal gripping of objects. - 14.5 x 12 cm base with 2 anchoring holes. - Jaw opening up to 9.5 cm. - Incorporates an anvil at the base of the 7.5x4 cm screw. - Article known as parallel vice, table clamp, workshop vice, pipe vice, table vice, rotating table vice, clamping vice, bench clamp.
Steel vice - Made of steel. - Jaw width: 100 mm. - Serrated jaws for optimal gripping of objects. - 12.5 x 12 cm base with 2 anchoring holes. - Jaw opening up to 11.5 cm. - Incorporates an anvil at the base of the 6x4 cm screw. - Article known as parallel vice, table clamp, workshop vice, pipe vice, table vice, rotating table vice, clamping vice, bench clamp.
Heavy duty vice - Made of spheroidal graphite iron casting, which has about 20% more strength than normal cast iron vices. - Jaw width: 130 mm. - Hardened and tempered replaceable jaws. - It has a 360º rotating base with a double anchoring system. - Serrated jaws for optimal gripping of objects. - Stable base with Ø 15 cm. diameter and 3 holes for anchoring. - Jaw opening up to 14 cm. - Incorporates an anvil at the base of the 7x9 cm screw. - Rotating bar with rubber stops. - Includes welded clamps for holding pipes or other irregularly shaped objects. - Article known as parallel vice, table clamp, workshop vice, pipe vice, table vice, rotating table vice, clamping vice, bench clamp.
Heavy duty vice - Made of spheroidal graphite iron casting, which has about 20% more strength than normal cast iron vices. - Jaw width: 105 mm. - Hardened and tempered replaceable jaws. - It has a 360º rotating base with a double anchoring system. - Serrated jaws for optimal gripping of objects. - Stable base with Ø 12 cm. diameter and 3 holes for anchoring. - Jaw opening up to 9 cm. - Incorporates an anvil at the base of the 7x5 cm screw. - Rotating bar with rubber stops. - Includes welded clamps for holding pipes or other irregularly shaped objects. - Article known as parallel vice, table clamp, workshop vice, pipe vice, table vice, rotating table vice, clamping vice, bench clamp.
Wolfpack Poligrip Curved Clamp - Length: 250 mm. - Lockable vice with screw and forged jaw. - Made of Chrome Vanadium steel, providing high hardness and resistance. - Ideal for industrial work, holding pipes, tube clamping, etc. - Item known as curved pressure pliers, locking pliers, locking pliers, lockable jaw,
Wooden handle tourniquets. - Dimensions: 500 x 120 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Wooden handle tourniquets. - Measurements: 200 x 50 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Wooden handle tourniquets. - Measurements: 250 x 50 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Wooden handle tourniquets. - Measurements: 150 x 50 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Wooden handle tourniquets. - Measurements: 100 x 50 mm. - Heads made of iron and the bar made of carbon steel. - Tilting clamping head, to better adapt to possible irregularities or angles. - Head and head with protective plastics, to reduce marks on the material to be joined. - Serrated bar on both sides to prevent unwanted slipping. - Handle made of red wood. - Ideal for carpentry, crafts, DIY. - Item also known as: clamps, clamps, wood clips, wood press, carpenter clamps, bar clamps.
Maurer 18" grip tourniquet. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc. - Black and yellow colors. - Measure 18".
Maurer 24" grip tourniquet. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc. - Black and yellow colors. - Measure 24".
Maurer 12" grip tourniquet. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc. - Black and yellow colors. - Measure 12".
Tourniquet - Size: 80 x 500 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 80 x 400 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 80 x 300 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 80 x 250 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 80 x 200 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 50 x 300 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 50 x 250 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 50 x 200 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 50 x 150 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 50 x 100mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 120 x 1200 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
Tourniquet - Size: 120 x 500 mm. - With through lever. - Ideal for industrial work. - Article also known as: sergeant. - Very useful for fixing parts that are going to be machined, glued, etc.
