Product Features
Integrated motion sensor that turns on when approaching within 1.5 meters and turns off the light after 15 seconds after leaving the detection zone.
Removable battery operation, which can be recharged using a 5V DC 1A mobile charger with a micro USB type B plug (not included) without having to remove the bar.
The tube can be cut to fit the required size.
Mocha/anodized aluminum bar with semi-rigid PVC rubber to prevent noise from the hangers.
Very easy wireless installation thanks to the side brackets and mounting screws included.
Sensor detection range: 1.5 meters.
Sensor detection angle: 90°.
Number of LEDs: 30.
Color temperature: Natural white (4,000K).
Luminous flux / Brightness: 30 lm.
Power: 0.6W.
Lighting angle: 120°.
Protection class: IP20.
Hanging bar for wardrobe or dressing room with LED lighting and motion detector fed with a removable battery The battery is located in one of the side supports hidden behind a cover and can be easily recharged using a 5V DC 1A mobile charger with a micro USB type B plug (not included) without having to remove the bar. The battery has an LED indicator that changes from red to green when charging is complete after approximately 4 hours.
His built-in motion sensor It allows the light to turn on when approaching within 1.5m and will turn off the light after 15 seconds after leaving the detection zone.
The tube is made of aluminum with a semi-rigid PVC rubber to avoid noise from the hangers and can be cut to fit the interior measurement of the furniture.
Simple wireless installation thanks to the supplied side brackets and mounting screws. The ideal solution for lighting the inside of wardrobes to make it easier to locate clothing in the dark.
Removable battery operation, which can be recharged using a 5V DC 1A mobile charger with a micro USB type B plug.
Product Features
Tube length: 750/1150 mm.
The kit includes everything needed to mount two Luxe closet rods.
Top mount with M6 screw.
M6x40m screws are included for top mounting of the bar brackets.
It is made of aluminum with a textured black painted finish.
According to ISO standard: 7170:205, the bar can support a maximum weight of 40kg/meter evenly distributed.
He Kit includes everything necessary for assembly two Luxe wardrobe rods : the tube, the side supports, and the M6 screws for assembly. The tube has a co-extruded PVC rubber to prevent noise from the hangers.
Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The side supports allow upper mounting with the M6x40 mm screws included. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes everything needed to assemble two 30x15 mm Silk wardrobe rods : the tube, the side supports, and the M6 screws for assembly. The tube has a co-extruded PVC rubber to prevent noise from the hangers.
Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The side supports allow two types of mounting: on the sides of the module with a 3.5 diameter wood thread screw or top mounting with the M6x40 mm screws included. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
Tube length: 750mm/1150mm.
The kit includes everything needed to mount two 30x15mm Silk wardrobe rods.
Two mounting possibilities for the side supports: on the sides of the module with a Ø3.5 wood thread screw or top mounting with an M6 screw.
M6x40 m screws are included for top mounting of the bar brackets.
Tube made of aluminium with a matte anodised finish, and supports made of aluminium-coloured painted plastic.
Tube made of aluminum with a black finish, and supports made of black plastic.
According to ISO standard: 7170:205, the bar can support a maximum weight of 40kg/meter evenly distributed.
FAQs - frequently asked questions:
What is the maximum weight that a clothes hanger bar bracket can hold?
According to standard ISO: 7170:2005, Emuca supports can support a maximum weight of 40 kg per metre, evenly distributed.
The kit includes two 30x15mm wardrobe bars made of steel and the side supports for installation.
Available in two tube sizes: 950 mm and 1400 mm . The 1400mm kits also include 2 central supports to provide greater rigidity to the assembly.
The Polux LED lighted closet bar has a motion sensor that makes it easy to turn on and off by detecting movement with a detection range of less than 1.5 meters. The light will turn off within 45 seconds after no movement is detected. It can be installed in a 558 mm closet space and can be adapted to smaller spaces by cutting the bar. Its assembly consists of screwing the bar to the sides of the space where it is installed. The materials used are matte anodized aluminum and rubber to reduce the noise of the hangers. It allows a 12 V DC power input, requires a 12 V converter that is not included.
Integrated motion sensor that turns on when approaching within 1.5m and turns off the light after 45 seconds after leaving the detection zone
Power supply: 12V DC. Requires a 12V LED converter for installation (not included in the supply).
Valid for an interior cupboard gap of between 708-858mm. The tube can be cut to adapt it to the required measurement.
Matte anodized aluminum bar with semi-rigid PVC rubber to prevent noise from the hangers.
Very easy installation thanks to the side brackets and mounting screws included.
Sensor detection range: 1.5 meters.
Sensor detection angle: 90°.
Number of LEDs: 50.
Color temperature: Natural white (4,000K).
Luminous flux / Brightness: 190 lm.
Power: 4W.
Lighting angle: 120°.
Protection class: IP20.
Energy rating A.
The kit includes everything needed to mount two D. 28 mm wardrobe rods : the tube , the side supports , and the screws for mounting. Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The supports are fixed using the M5x38 mm screws included, which are valid for boards from 16 to 30 mm. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes two 30x15 mm wardrobe bars made of aluminium and the side supports for installation.
Available in two tube sizes: 750 mm and 1150 mm . The 1150mm kits also include 2 central supports to provide greater rigidity to the assembly. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes two 30x15 mm wardrobe bars made of aluminium and the side supports for installation. Available in two tube sizes: 750 mm and 1150 mm . The 1150mm kits also include 2 central supports to provide greater rigidity to the assembly. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
Accessory kit for making closet rods to equip the interior of closets, dressing rooms, laundry rooms or pantries. They are designed to be used in conjunction with wire shelves and their shelf supports (Code 7027612). These supports have slots for the placement of the closet rod. This kit consists of two rods, two sets of supports (right and left) and two sets of end caps.
The kit includes everything needed to mount two D. 28 mm wardrobe rods : the tube , the side supports , and the screws for mounting.
Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The supports are fixed using the M5x38 mm screws included, which are valid for boards from 16 to 30 mm. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes two 30x15 mm wardrobe bars made of steel and the side supports for installation.
Available in two tube sizes: 750 mm and 1150 mm . The 1150mm kits also include 2 central supports to provide greater rigidity to the assembly. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes everything needed to mount two D. 28 mm wardrobe rods : the tube , the side supports , and the screws for mounting. Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The supports are fixed using the M5x38 mm screws included, which are valid for boards from 16 to 30 mm. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes everything needed to mount two D. 28 mm wardrobe rods : the tube , the side supports , and the screws for mounting. Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The supports are fixed using the M5x38 mm screws included, which are valid for boards from 16 to 30 mm. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes two 30x15 mm wardrobe bars made of aluminium and the side supports for installation.
Available in two tube sizes: 750 mm and 1150 mm . The 1150mm kits also include 2 central supports to provide greater rigidity to the assembly. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes two 30x15 mm wardrobe bars made of steel and the side supports for installation.
Available in two tube sizes: 750 mm and 1150 mm . The 1150mm kits also include 2 central supports to provide greater rigidity to the assembly. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
The kit includes everything needed to mount two D. 28 mm wardrobe rods : the tube , the side supports , and the screws for mounting. Available in two tube sizes: 750 mm and 1150 mm . The 1150 mm kits also include 2 central supports to provide greater rigidity to the assembly. The supports are fixed using the M5x38 mm screws included, which are valid for boards from 16 to 30 mm. In compliance with ISO: 7170:205, the bar and supports can support a maximum weight of 40 kg/meter evenly distributed.
Round chrome stor tube/bar - Diameter: 12 mm. - 1.5 meter bar. - Uses: wardrobes, lockers, shoe racks, clothes hanging rails, curtain rods, counterweight bars in blinds, etc. - Ideal for mounting curtains.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 1.5 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth pine. - Length x diameter: 1.5 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 1.5 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 1.8 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth pine. - Length x diameter: 1.8 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 1.8 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 2.1 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth pine. - Length x diameter: 2.1 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 2.1 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 2.4 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 2.4 meters x 28 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 1.2 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth pine. - Length x diameter: 1.2 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak - Length x diameter: 1.2 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth white. - Length x diameter: 1.2 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut - Length x diameter: 1.5 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar - Finish: smooth pine - Length x diameter: 1.5 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 1.5 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth white. - Length x diameter: 1.5 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth walnut. - Length x diameter: 1.8 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth pine. - Length x diameter: 1.8 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
Wooden bar. - Finish: smooth teak. - Length x diameter: 1.8 meters x 20 mm. - Ideal for mounting curtains. - Article also known as curtain rod, curtain tube.
