En esta guía encontrarás criterios de elección, preguntas frecuentes, opciones de instalación y materiales de la categoría Furniture hardware.
Guía de uso
Planifica por uso y carga: define el tipo de puerta/cajón, espesor del tablero y peso aproximado. Para puertas batientes de mueble, usa bisagras de cazoleta; en cajones, guías de extracción total con cierre suave y capacidad acorde; para refuerzo estructural en madera, escuadras metálicas; y para módulos altos, colgadores ocultos con regulación.
Medición básica: verifica interejes de tiradores, profundidad de guía compatible con el mueble y, en bisagras, cazoleta estándar (habitual Ø35 mm) y solape deseado. Presenta la pieza, marca y realiza pretaladros en maderas densas para evitar fisuras.
Montaje preciso: aprieta progresivamente, comprueba el paralelismo de cajones y ajusta la regulación (vertical, horizontal y profundidad) hasta eliminar rozamientos. En refuerzos invisibles, prioriza escuadras/placas con acabado acorde al interior del mueble.
Preguntas frecuentes
¿Cómo elegir entre bisagra, guía o escuadra?
Bisagra para puertas batientes; guía para cajones según carga y longitud; escuadra/placa para unir o reforzar tableros y esquinas. Elige en función del esfuerzo y del tipo de apertura.
¿Qué tener en cuenta al montar guías de extracción total?
Compatibilidad de profundidad con el módulo, capacidad de carga y sistema de cierre. Alinea ambas guías al mismo nivel y verifica el escuadre antes del apriete final.
¿Qué tirador es compatible con mi frente?
Revisa el intereje (distancia entre agujeros) y la longitud total del tirador. Utiliza tornillos M4 incluidos o equivalentes y aprieta sin forzar el acabado.
¿Cuándo usar colgadores ocultos?
En módulos altos o pensados para quedar “a ras”, donde necesites regulación y un acabado limpio. Comprueba la carga admisible y ancla la pletina a pared resistente.
¿Cómo refuerzo una balda que vence?
Instala escuadras metálicas en L con ala larga al montante y ala corta a la balda, usando tornillos para madera que ajusten al diámetro del agujero sin holgura.
Instalación y fijación
Instalación y fijación: atornillado en madera (tirafondos/eurotornillo), cazoleta habitual Ø35 mm en bisagras de mueble, guías atornilladas al lateral del módulo y colgadores con pletina a pared.
Materiales
Acero cincado/niquelado y zamak en herraje visto; aluminio en tiradores; polímeros técnicos (ABS/PA) en accesorios; acabados aptos para interior doméstico.
At VicHome we sell all types of furniture hardware for professionals and individuals.
Repair and improve your home
Emuca - Wolfpack - Maurer
Hardware most sought after by customers:
Escoge herrajes y accesorios para muebles pensados para montaje, reparación y mejora: bisagras, guías, patas, pomos, colgadores y escuadras metálicas.
Stock actualizado, descuentos por cantidad y envío 48–72 h en España y Portugal.
This mechanism, using a set of pistons, lifts the base along with the mattress, revealing a useful surface for storing your duvet, sheet sets, clothes, toys or other objects.
This mechanism is compatible for 135 cm beds with a maximum weight of 60 kg respectively.
It is easy to assemble and includes all the accessories necessary for its installation. This mechanism is made of steel and has a high-quality and durable black lacquer finish.
Contains a set for 135cm beds (with 1150N pistons) with front opening and a maximum weight of 60kg.
Assistant mechanism for opening the chest/bed base.
Complete hardware for assembly is included.
Easy installation.
Black lacquer finish.
Product Features
Kit of hardware required for the assembly of an external drawer with a height of 105 mm and depth of 270/300/350/400/450/500 mm, except for the border, back and bottom.
Includes full extension guides, a set of ribs and a set of front hooks for the outer drawer.
The guides are fully extendable with soft closing and a maximum load of 30 kg.
Made of anthracite grey or white painted steel.
The Concept kitchen and bathroom drawer It is available in kit format with all the necessary hardware for assembly. It also stands out for its great load capacity which can support up to 30 kg per drawer. Includes full extraction guides with soft closing , set of hooks and ribs Available in white or anthracite grey painted finish. You will only need the boards cut to the correct dimensions for the bottom, back and drawer border.
Hanging kit for upper cabinet units in kitchen, bathroom, and home furnishings. It stands out for its ability to withstand heavy loads of up to 65 kg and for its ability to adjust the module's position laterally, in height, or in depth. They are mounted on the wall using a plate and are hidden from view once mounted in the unit. The only visible point from inside the unit is a small machining process that must be performed to adjust the module once it has been hung.
Hanging kit for upper modules in kitchen, bathroom and home furniture.
The hangers are hidden once the upper cabinets are assembled.
For modules between 600 and 1,000 mm high and 300 to 350 mm deep.
They have right and left hands for placement on the furniture.
They can be adjusted once the module is hung with a machining diameter of 18 mm.
With 3 adjustments: side 16 mm, height up to 18 mm and depth up to 25 mm.
The hangers are mounted on the wall using the included bracket.
The fixing is done on the side of the independent module of the top cover.
Requires pre-drilling with a diameter of 10 mm for assembly.
Each set has a load capacity of 65 kg.
For better fixation, it includes a rotating pin that is fixed to the module by moving the lever.
It is recommended to use a Philips screwdriver no. 2 Ø6 or Pozidrive no. 2 Ø6.
Made of steel with a galvanized finish.
Product Features
Kit of hardware required for the assembly of an external drawer with a height of 105 mm and depth of 270/300/350/400/450/500 mm, except for the border, back and bottom.
Includes full extension guides, a set of ribs and a set of front hooks for the outer drawer.
The guides are fully extendable with soft closing and a maximum load of 30 kg.
Made of anthracite grey or white painted steel.
The Concept kitchen and bathroom drawer It is available in kit format with all the necessary hardware for assembly. It also stands out for its great load capacity which can support up to 30 kg per drawer. Includes full extraction guides with soft closing , set of hooks and ribs Available in white or anthracite grey painted finish. You will only need the boards cut to the correct dimensions for the bottom, back and drawer border.
Product Features
Synchronized full-extension drawer guides for drawers with depths from 290 mm to 490 mm. Designed for home furniture.
They have a hook to facilitate the quick assembly/disassembly of the drawer on the guides.
Three-way adjustment, vertical +3 mm, horizontal ±1.5 mm and depth +3 mm.
They have self-closing and a damping piston on both guides, which provides a soft closing of the drawer.
Maximum load 30 kg. Supplied in complete sets with right and left hands.
Its rolling is carried out on delrin rollers that allow horizontal and vertical guidance.
Silver concealed drawer slides are high-quality and perform better in home furnishings. These slides provide full drawer extension. They feature self-closing and a damping piston on both slides, providing a soft-close drawer. They also feature a locking catch for easy assembly and quick disassembly of the drawer from the slides.
FAQs - Frequently Asked Questions
How to install the Silver full extension drawer runners with hook?
The following video shows how to install the Silver full-extension drawer slides with hooks.
How do I adjust the guides for Silver full-extension drawers with hooks?
The following video shows how to adjust the Silver full-extension drawer guides with hooks.
Are the drawer dimensions of a Silver full-extension guide with a hook compatible with a Slippe guide, partial and/or full-extension with a hook?
Yes, the drawer dimensions are the same between the Silver and Slippe guides with partial and/or full extension and hook.
Are the drawer dimensions of a Silver full extension guide with hook compatible with a Silver full extension guide with pivot?
No, the drawer measurements are different between them.
The Push Lite closure is the best solution for opening and closing furniture doors without the need for handles . Simply press the door with a light touch to open or close the cabinet. The result is furniture with straight, clean lines, which is quieter, more elegant and minimalist.
This system is designed for doors with inverted hinges or without automatic closing function , in furniture for home, office or closets. They have a push opening and two different closing models, cushioned or magnetic.
The soft-close feature has a rubber head that provides a soft, slamming closure. On the other hand, the magnetic closure has a magnet in the head, with a force of 2.5 kg, that ensures the door closes. It also includes a metal plate and a screw to attach to the door.
Its installation is very simple, it is screwed into the furniture with an 80 mm long support and the screws included . In addition, by turning the head it can be adjusted from -1 to +5 mm to fit the door properly.
It is a solution for opening and closing furniture doors without the need for handles.
It is designed for doors with inverted hinges or without self-closing function.
It provides a push-open and a magnetic closure, with a 2.5 kg magnet in the head, which ensures the door closes. It also includes a metal plate and a screw to put on the door.
Its installation is very simple, it is screwed into the furniture with an 80 mm long support and the screws included.
By turning the head you can adjust from -1 to +5 mm to fit the door properly.
It is made of grey plastic and is supplied in batches of 10 units.
The Palermo furniture handle is made of aluminium with a modern and contemporary design. It can be installed both horizontally and vertically . It is designed for all types of drawer fronts and cupboard doors. It is an ideal handle for kitchen, bathroom, home and office furniture. They are supplied individually packaged to avoid scratches , and also include M4 screws for installation on the furniture.
Lot of 10 diagonal grip design handles.
Length 120 mm. Valid for center distances (distance between mounting holes) 96 mm.
Length 150 mm. Valid for center distances (distance between mounting holes) 128 mm.
M4 screws for installation included.
Made of matte anodized aluminum finish.
Each piece individually packed to avoid scratches and bumps.
The Miami furniture handle is made of hollow stainless steel with a modern and contemporary design. It can be installed both horizontally and vertically . It is designed for all types of drawer fronts and cupboard doors. It is an ideal handle for kitchen, bathroom, home and office furniture. The M4 screws for installation are included. Each handle is individually packaged to avoid bumps and scratches.
Set of 10 handles for horizontal or vertical installation.
Length 272 mm. Valid for center distance (distance between mounting holes) 192 mm.
M4 screws for installation included.
Made of hollow stainless steel with black painted finish.
Individually packaged to avoid scratches.
Product Features
Kit of hardware required for the assembly of an external drawer with a height of 105 mm and depth of 270/300/350/400/450/500 mm, except for the border, back and bottom.
Includes full extension guides, a set of ribs and a set of front hooks for the outer drawer.
The guides are fully extendable with soft closing and a maximum load of 30 kg.
Made of anthracite grey or white painted steel.
The Concept kitchen and bathroom drawer It is available in kit format with all the necessary hardware for assembly. It also stands out for its great load capacity which can support up to 30 kg per drawer. Includes full extraction guides with soft closing , set of hooks and ribs Available in white or anthracite grey painted finish. You will only need the boards cut to the correct dimensions for the bottom, back and drawer border.
This set of two interior hinges with bushings is specifically designed for furniture with glass doors. Their U-shape hugs glass with a thickness between 4 and 6 mm , and the hinge pivot acts as a pivot axis on the bushing. To install the bushing, a 9 mm diameter hole must be pre-drilled in the base of the furniture where it is pressure-fitted. They also have screws that firmly press the glass to prevent it from coming out. Each set also includes a right-handed and a left-handed hinge. They are made of steel with a metallic gray finish.
Interior hinge for glass doors.
For glass thicknesses from 4 to 6 mm.
The hinge has a pivot that acts as a pivot axis on the socket.
The socket for pressure mounting in the base of the furniture is included.
For installation, a 9 mm diameter pre-drill is required.
It has screws that press the glass so that it does not come out.
A right-hand and a left-hand hinge are supplied.
Made of steel with a metallic gray finish.
The set of lifting mechanisms turns a coffee table into a practical multifunctional table. Its springs allow the table surface to be raised and kept in an elevated position, making it easier to eat, read or work from the sofa. In addition, the space underneath can be used to store, for example, the television remote control.
Easy to install, they have holes for fixing to the furniture with screws, both on the sides and on the top and bottom. They are made of steel with a high-quality and durable satin black lacquer finish.
Dust seal ideal for sealing gaps between sliding doors of furniture and cupboards, preventing the entry of dust and dirt.
It is supplied in 10-metre rolls and its installation is very simple, as you only need to cut it to the desired size with scissors and fix it to the surface with its self-adhesive base.
